1. 2000pnp.exe Driver
2. README File Contents

README Driver File Contents (2000pnp.exe)

****************************************************************************
*                                                                          *
*                     ATI AT-2000PNP Ethernet Adapter                      *
*                                                                          *
*                 LANtastic AI-LANBIOS Compatible Driver                   *
*                                                                          *
*                              README file                                 *
*                                                                          *
****************************************************************************

1. Introduction:

   This Ethernet LANtastic AI-LANBIOS Compatible Driver supports 802.3 and
   XEROX frame type.  Ensure that you have an adapter-independent version
   of the LANtastic product and the LANtastic NOS/AI, since AE-2 LANtastic
   v3.02 or later can no longer work with non-Artisoft hardware.


2. Contents of the Subdirectory:

      PNPLAN.EXE      The LANtastic AI-LANBIOS compatible driver that
                      works with LANtastic v4.1 and AILANBIOS v3.01.


3. Installation

   1) Install the PNP Card on your system, following the procedure de-
      scribed in your Ethernet adapter user's manual.

   2) Install the LANtastic product following the directions in your LAN-
      tastic Network Operating System User Manual.  Then choose the type
      of the LAN adapter and driver; for instance, NE2000.

   3) After installation, edit STARTNET.BAT to replace the line "NEX000..."
      with "PNPLAN VERBOSE", as the following example shown:
                .
                .
                ( SHARE /L:200 )

                PNPLAN VERBOSE
                AILANBIOS
                REDIR PCNAME LOGINS=3

                ( SERVER )
                NET LOGIN \\SERVER USER
                .
                .

    4) Copy PNPLAN.EXE from the Ethernet Driver Disk to your \LANTASTI
       subdirectory.

    5) Run STARTNET.BAT to start the LANtastic NOS.


4. Unload

   To unload this driver, firstly remove the AILANBIOS, then remove the
   driver, as shown below:
                 .
                 .
                 AILANBIOS REMOVE
                 PNPLAN REMOVE