WFW31.TXT Driver File Contents (100v34.ZIP)

*                                                                           *
*                    PCI Fast Ethernet 10M/100M Adapter                     *
*                                                                           *
*                NDIS Driver for Windows for WorkGroup 3.1                  *
*                                                                           *
*                                                                           *


  This document shows you how to install Windows for Workgroup 3.1 NDIS driver
  and how to use the enhanced functions by setting the custom keywords.

Contents of the Subdirectory:

    WFW31.TXT           This file.
    OEMSETUP.INF        The setup information file for WFW31.
    FETND.DOS           The NDIS2 driver.


  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  (A:\SETUP.EXE) to make sure your connection with the network is correct.

  Setup Procedure:

    1) Start the Windows for Workgroup 3.1.

    2) Click the "Control Panel" icon in the Program Manager Window.

    3) Click the "Network" icon in the Network Window.

    4) When the "Network Settings" dialog box appears, select "Adapters" button.

    5) Select "Add" icon from the "Network Adapters" dialog box.

    6) Select "Unlisted or Updated Network Adapter".

    7) When the "Install Driver" window appears, insert the distribution
       diskette into drive A:, type "A:\WFW31" and press <Enter>.

    8) Press <Enter> to select "PCI Fast Ethernet 10M/100M Adapter".

    9) Click "Setup..." to popup the setup window.

   10) Click "Advanced..." if you want to modify the advanced features.
       Please refer to the next section for the description of the keywords.

   11) Close each windows and restart the computer.

Configuration Files:

    There are two ways to modify the configuration:
    a) Follow step 10/11 in the previous section.
    b) Modify PROTOCOL.INI in your WFW31 directory directly.

    File Name:          PROTOCOL.INI
    Sample of configuration file:


    Custom Keywords:
        FULLDUPLEX                      This keyword is used to enable full
                                        duplex mode.

        SPEED                           This keyword is used to force the
                                        adapter at 10Mbps or 100Mbps speed.

        AUTO                            This keyword is used to force the
                                        chip at Auto-Negotiation mode.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.91