Please use the "tftp client" program to install the firmware. Remember to key in forllowing information when run this utility. "Server IP" is 192.168.1.1 (Router LAN IP) "Password" is "password" (current Router password) Locate the bin file, please browse the file system and choose the correct one "Remote File" is "code.bin" Then click "send". After the upgrade process finishes, wait about one minute until the router write code to flash memory. During the write process, you can see the test LED flashes. After the router finish the upgrade process, you can see the test LED stop flashing. Then restart the router by pressing the front reset button. Please remember not to interrupt the firmware upgrade processDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.