Readme file for the Cross iPen Pro version 4.0 March 3, 1998 INTRODUCTION The iPen Pro product includes both the Cross iPen hardware as well as the following software products: Drivers for the iPen All-Write(TM) for Word 97 All-Write(TM) The driver software is what makes the iPen hardware work with Windows. Be sure to use the ABSOLUTE mode of the iPen when doing handwriting and drawing, such as with the two All-Write products. To place the iPen into ABSOLUTE mode, click on the leftmost iPen tablet icon in the upper left corner of the iPen surface. The two All-Write products provide you the ability to annotate electronic documents as easily as you annotate paper documents. All-Write for Word 97 is useful to folks that have Word 97. NOTE: if you have Microsoft Word, but haven't upgraded to Word 97 yet, you don't have to buy the complete Office upgrade to get to Word 97. You can purchase an upgrade to Word 97 only for considerably under $100. Of course All-Write allows you to annotate a Word document of any version. Once installed, All-Write allows you to use your Cross iPen and write directly on the Word document. It is that easy. You put this to many uses; o Add a personal note o Draw a map or other helpful diagram o Make changes and comments on a document and email your marked up document back to the originator. o Add a signature to a letter or contract o The "ink" you write is stored on Word's standard drawing layer, so it is visible to most versions of Word. That is the person you send your comments to does not have to have Word 97. Note, that to send a marked up document to a Word 95 user, you have to save the file in Word 95 format. All-Write is a general purpose annotation application system. It allows you to do the same kinds of thing the All-Write for Word 97 product does, but it allows you to do it on virtually any Windows document. So, you can, for example, mark up a spread sheet, an email, or a project plan, on and on. The way All-Write works is as follows: o Get the document on the screen that you want to annotate o "Print" to the "Cross All-Write" printer. This captures the document, converts it to a special file format and brings it up in the All-Write application, ready to be marked up. o Send the "marked up document" as a file, as an email, or as a fax. Send a file or email to anyone who has Windows. Use the "self viewable file" option, which sends a file that is viewed simply by double clicking it. REQUIREMENTS o Windows 95 or Windows NT 4.0 or later o Microsoft Word 97 if you want ot use All-Write for Word 97 o A reasonably fast processor (no real extra requirement here) o Memory probably best at 32MB or more INSTALLATION The iPen Pro CD-ROM is designed to take advantage of Windows "AutoPlay" capability and to run automatically when you insert the CD-ROM into its drive. It will guide you through the installation of which ever components you wish to use. GETTING STARTED If you install the full product, there is quite a bit to learn as you get started. IPEN HARDWARE AND DRIVER SOFTWARE - A good source for information is the iPen User Guide. There really isn't much to know. It just works like a pen. BE CAREFUL, the ipen has two modes, selected by icons on its surface. Be sure to use "absolute mode" (the big icon) when you do handwriting and annotations. NOTE: after you install the iPen drivers, you must reboot the system before you can use the pen. To view the iPen README file: START - PROGRAMS - IPEN - IPEN README ALL-WRITE FOR WORD 97 - A great place to start is by reading the README file for this product. It contains a simple example of annotation in Word. After you get started, be sure to use the help system. It is loaded with information and tips. To access the All-Write for Word 97 help, click the help icon on the All-Write toolbar. NOTE: after you install All-Write for Word 97 you can use it immediately, if the iPen is operational. No reboot is required. To view the All-Write for Word 97 README file: START - PROGRAMS - CROSS ALL-WRITE - CROSS ALL-WRITE FOR WORD 97 README ALL-WRITE - Likewise, a great place to start is by reading the README file for this product. The README file was copied to your hard drive as part of the installation. To view it: select START, PROGRAMS, CROSS All-WRITE, README. After you get started, be sure to use the help system. It is loaded with information and tips. NOTE: after you install All-Write you can use it immediately, if the iPen is operational. No reboot is required. To view the All-Write README file: START - PROGRAMS - CROSS ALL-WRITE - CROSS ALL-WRITE README UNINSTALLATION Each component of the iPen Pro is installed as an independant product. To uninstall any of the components, you must use the control panel's Add/Remove programs feature as follows: o Use the START menu o Point to SETTINGS o Click on CONTROL PANEL o Double click the ADD/REMOVE PROGRAMS icon o In the list, click the component you wish to uninstall o Click the ADD/REMOVE... button The product names to look for and uninstall are as follows: o iPen - these are the hardware drivers, without these the pen will not move the screen cursor. o Cross All-Write - this is the annotate anything application. o Cross All-Write for Word 97 - the word tool TROUBLESHOOTING If AutoPlay isn't working on your computer, you can run the setup by using the START menu RUN and specifying SETUP.EXE in the root directory of the CD-ROM. Each component of the iPen Pro has its own SETUP program which can be run individually. Each is in its own subdirectory on the iPen Pro CD-ROM: Root directory - SETUP.EXE is the multimedia introduction. When you choose to Install the software, it runs SETUP.EXE in the INSTALL subdirectory. Install subdirectory - SETUP.EXE is the iPen Pro installer. It will automatically execute the following setups for you. INSTALL\IPEN95 - SETUP.EXE is the iPen driver software for Windows 95 INSTALL\IPENNT - SETUP.EXE is the iPen driver software for Windows NT INSTALL\ALLWRITE - SETUP.EXE is the setup program for All-Write INSTALL\ALLWRTWD - SETUP.EXE is the setup program for All-Write for Word 97. Be aware of the following gotchas: BE SURE TO USE ABSOLUTE MODE FOR HANDWRITING AND ANNOTATION. The the ipen has two modes, selected by icons on the tablet surface. Be sure to use "absolute mode" (the big icon on the left) when you do handwriting and annotations. The RELATIVE mode is best used when "mousing". It moves the screen cursor very quickly relative to your hand motion. You must have Microsoft Word 97 installed on your computer before you are able to install All-Write for Word 97. You cannot install these in the reverse order. You may install a new release of All-Write for Word 97 over an older release without first having to uninstall the older version. If you do this, do not then run the uninstall for the old version because it will render the new version inoperable. To install a new version of the iPen drivers you must uninstall any other version of the iPen drivers and then reboot before running the new install. The iPen drivers use Wintab technology and will coexist with some other Wintab based pointing devices but not all others. The best policy is to uninstall any other Wintab drivers before installing the iPen drivers. To install a new version of All-Write you must uninstall any other version of All-Write and then reboot before running the new install. COPYRIGHTS AND TRADEMARKS All-Write is a trademark of A. T. Cross Corporation Windows is a trademark of Microsoft Corporation Portions copyright West Enterprises, Inc. All rights reservedDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.