NetWare 32-bit ODI Driver Installation
=======================================
NetWare DOS ODI Server Driver Installation (NetWare 4.10)
=========================================================
Requirements:
-------------
SOHOware Driver Diskette (FE100A.LAN)
Installation Procedure:
-----------------------
1. Insert the SOHOware Driver Diskette into drive A
and check the contents of subdirectory \NW410
It should contain the following file :
FE100A.LAN Ä Novell NetWare Server Driver for
SOHOware 10/100 PCI Network Adapter.
FE100A.LDI Ä Novell NetWare Server Driver Installation
Information File.
AUTOEXEC.NCF
MSM.NLM
ETHERTSM.NLM
2. At the NetWare prompt (indicated by the Server name),
run the INSTALL.NLM program by typing:
server name: LOAD INSTALL <Enter>
3. Select "Maintenance/Selective Install" and press <Enter>.
4. Select "LAN Driver Options (Configure/Load/...)"
and press <Enter>.
5. Press the <Ins> key to specify other drivers to install.
6. Press <F3> and specify the driver path (A:\NW410)
and press <Enter>.
7. The FE100A.LAN driver should appear in your choice list for
the 'Select a LAN Driver' field. Choose this driver to
start the driver loading and binding procedure. This
will allow you to load and bind all 4 frame types supported
by NetWare.
8. Next time you start up your system, simply follow steps
2 to 4 to complete the installation.
Installation notes:
-------------------
1. If you are doing the PERFORM3 or ENDURNCE test, you'd better add the
followings in your AUTOEXEC.NCF of the server,
Set Immediate Purge Of Deleted Files=ON
2. You had better add the followings in the STARTUP.NCF:
Set Reserved buffers below 16 meg = 200
Set maximum Physical receive Packet Size=1530
set minimum packet receive buffers = 150
---
All trademarks and brand names mentioned belong to their
respective owners.
-- THE END --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.