1. ETH16i32.zip Driver
2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (ETH16i32.zip)

[data]
type=network
version="3.11.262"

[disks]
1=\mslanman.dos\drivers\ethernet\eth16i,"EtherTeam 16i/32 LAN Support Software Diskette"
2=\ndis3\win,"EtherTeam 16i/32 LAN Support Software Diskette"

[netcard]
icl$eth16i="ICL EtherTeam 16i Adapter",1391,ndis,ethernet,0x07,eth16i,icl$eth16i_nif
icl$eth32="ICL EtherTeam 32 Adapter",1391,ndis,ethernet,0x07,eth16i,icl$eth32_nif

[eth16i]
ndis2=1:eth16i.dos
ndis3=2:eth16i.386
mlid=*:eth16i.com

;--------------------------------------------
; PROTOCOL.INI keywords for ICL EtherTeam16i.
;--------------------------------------------
[icl$eth16i_nif]
drivername=ETH16I$

; NOTE! The IOAddress is not added by default to PROTOCOL.INI, but
; only if any of the available values is selected.
;
io=IOAddress,,text,"0x240,0x260,0x280,0x2A0,0x300,0x340,0x380","AUTO",0x32

; NOTE! The Interrupt is not added by default to PROTOCOL.INI, but
; only if any of the available values is selected. (It can be even
; commented from this OEMSETUP, because any definition here cannot
; override the Setup value on the adapter). 
;
irq=Interrupt,,text,"5,9,10,15,","AUTO",0x32

; NOTE! These parameters are for both NDIS2 and NDIS3 driver. As
; a default they are not added to PROTOCOL.INI.
;
param=Transceiver,"Transceiver",text,"BNC,AUI,TP,AUTO","AUTO",0x32
param=TxBuffSize,"TransmitBufferSize",text,"4,8,16","8",0x32

; NOTE! These parameters are specific to NDIS2 driver only. As a
; default they are not added to PROTOCOL.INI.
;
param=MaxTransmits,"MaximumTransmits",int,"6,50,1",6,0x12

; NOTE! These parameters are specific to NDIS3 driver only. As a
; default they are not added to PROTOCOL.INI.
;
param=StagedReceive,"StagedReceive",text,"No,Yes","No",0x22

; NOTE! The NetAddress parameter  overrides the permanent network
; address of the adapter (this feature is hardly ever needed). If
; specified,  must be given  as a string of excatly 12 characters
; (enclosed in quotes), e.g. "00004B112233".
;
;param=NetAddress,"Net Address",chars,14,,0x17

;-------------------------------------------
; PROTOCOL.INI keywords for ICL EtherTeam32.
;-------------------------------------------

[icl$eth32_nif]
drivername=ETH16I$

; NOTE! The SlotNumber is not added by default to PROTOCOL.INI, but
; only if any of the available values is selected.
;
slot=SlotNumber,"Adapter Slot Number",int,"1,8,1",1,0x22

; NOTE! It is not necessary to give the Interrupt number but the
; driver can  resolve it automatically.
; Remove the comment sign if you want it appear in the Setup.
;
irq=Interrupt,,text,"3,5,7,9,10,11,12,15,","AUTO",0x32

; NOTE! These parameters are for both NDIS2 and NDIS3 driver. As
; a default they are not added to PROTOCOL.INI.
;
param=Transceiver,"Transceiver",text,"BNC,AUI,TP,AUTO","AUTO",0x32
param=TxBuffSize,"TransmitBufferSize",text,"4,8,16","8",0x32

; NOTE! These parameters are specific to NDIS2 driver only. As a
; default they are not added to PROTOCOL.INI.
;
param=MaxTransmits,"MaximumTransmits",int,"6,50,1",6,0x12

; NOTE! These parameters are specific to NDIS3 driver only. As a
; default they are not added to PROTOCOL.INI.
;
param=StagedReceive,"StagedReceive",text,"No,Yes","No",0x22

; NOTE! The NetAddress parameter  overrides the permanent network
; address of the adapter (this feature is hardly ever needed). If
; specified,  must be given  as a string of excatly 12 characters
; (enclosed in quotation marks), e.g. "00004B112233".
;
;param=NetAddress,"Net Address",chars,14,,0x17