******************************************************************* * ACCTON TECHNOLOGY CORPORATION * * ACCTON EN1407-SX Cheetah Gigabit adapter * * * * Copyright (C) 1999 Accton Technology Corporation * * All Rights Reserved. * ******************************************************************* Accton EN1407-SX Cheetah Gigabit adapter General Description The EN1407-SX adapter features include host offloading, bus acceleration, and high-speed data transfer engines. These features provide the ideal NIC solution for high-speed network servers. The Accton EN1407-SX Cheetah Gigabit adapter features 10/100/1000Mbps Ethernet Implementation for a Cost-Effective Migration Path Full and half-duplex operation Packet Burst in half-duplex; Symmetric/asymmetric full-duplex flow control 96KB embedded FIFO 32KB transmit (TX), 64KB receive (RX) Eliminates need for external FIFO Host Offloading via Chip-Level Internet Protocol (CLIP) and Policy-Based Behavior IPv4 checksum calculation IP, TCP and UDP checksums supported Packet filtering based on checksum errors 802.3ac and VLAN tag support Supporting 16 entry VLAN tag TCI table Filtering based on recognized VLANs VLAN tag stripping on receive Global and/or per packet VLAN tag insertion on transmit Optimized Bus Transfer Operation High-Speed PCI Interface PCI 2.1 compliant Efficient PCI master operation 33MHz, 32/64 bit operation 64 bit addressing Supports dual address cycles Additional Performance Features Independent TX and RX engines Robust Drivers and Management Supporting software includes certified device drivers and end user diagnostics Windows NT 3.51, 4.0 and 5.0 Windows 95 OSR2 Windows 98 NetWare 3.12, 4.11 and 5.0 Support for the OnNow Initiative and PCI Power Management Wake-on-LAN, Magic Packet PCI PME Signal Required elements of the 802.3 MIBDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.