NetWare Remote Boot ROM Installation Guide
====================================================================
Installation Procedure:
-----------------------
Following example is excuted on Protocol Ethernet_802.2 and Server driver is
MX32ODI.
Step 1: Using the steps booted from drive A (see DOS ODI Readme.TXT).
Create the Autoexec.bat in Drive A as:
lsl
mx32mlid
ipxodi
netx
f:
login
Step 2: After you booting from Drive A, do following actions:
In Server
:Load rpl frame=ethernet_802.2
:bind rpl to MX32odi
In Workstation
F:>cd\system
F:SYSTEM>dosgen
F:SYSTEM>copy net$dos.sys f:\login
F:SYSTEM>logout
Step 3: Power Off your PC, remove Diskette from Drive A, and Power On
again.
Install BOOTCONF.SYS
------------------------
1. Rename the NET$DOS.SYS(can use any name you want).
2. Create BOOTCONF.SYS in SYS:\LOGIN directory if you have multiple boot
images. The BOOTCONF.SYS file format is as below:
Node ID Number = Boot images files
Example: Sigle Boot Images
0x0000f8000001 = ne2000.sys
0x0000f8000002 = MXIC.sys
Example: Multiple Boot Images
0x0000f8000001 = ne2000.sys MXIC.sys
0x*,* = ne2000.sys MXIC.sys (All the node)
Brand and product names are trademarks of their respective companies.
==End Of File==
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.