.TOPIC:
Contents
Accton Technology Corporation
EN2220/EN2225 Fast EtherCard-32
10/100 Fast Ethernet CardBus PC Card
Windows 98 Driver Installation
File Description
ACCNDIS.SYS Windows 98 NDIS 4.0 driver
ACCNDIS.INF Windows 98 Setup File
WIN98.TXT This documentation file
Driver installation for Microsoft Windows 98
------------------------------------------------
1) Plug Accton's EN2220/EN2225 series adapter into one of the notebook's
PC Card sockets.
2) Windows 98 will prompt with "PCI Ethernet Controller" in the
"New Hardware Found" dialog box.
3) Select "Search for suitable driver for your device (Recommend)"
from the "Found New Hardware Wizard" dialog box, then click the "Next"
button.
4) Select "Specify a location" from the "Found New Hardware Wizard"
dialog box, then click the "Next" button.
5) Insert the Accton EN2220/EN2225 Driver Disk in the diskette drive.
6) Enter the driver's pathname, i.e. A:\WIN98, then click the "OK" button
in the "Found New Hardware Wizard" dialog box.
7) When the "Found New Hardware Wizard" dialog box locates the inf file,
i.e. A:\WIN98\ACCNDIS.INF, click the "Next" button.
8) When Windows 98 prompts with "Accton EN2220/EN2225 CardBus Fast Ethernet
Adapter" in the "Found New Hardware Wizard" dialog box, click the
"Finish" button.
9) When Windows 98 prompts with the "New Connection" Wizard dialog box,
click the "Next" button.
10) Modify or Add your LAN protocol or LAN Service... with the "LAN
Wizard" if required, then click the "Next" button to continue.
11) Type the name you want for this connection in the "LAN Wizard" dialog
box, then click the "Finsh" button.
12) Remove the Accton EN2220/EN2225 Driver Disk from your floppy drive.
13) Restart your computer to initialize the network function.
Trademarks:
Microsoft Windows 98 is a trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.