1. Touch_FW_A00_W8164_Setup_ZPE.exe Driver
  2. config.ini File Contents

config.ini Driver File Contents (Touch_FW_A00_W8164_Setup_ZPE.exe)

 DOWNLOAD NOW
config.ini Driver Update Utility 
[Uniformity]
UniformityCmd=Uniformity\Uniformity.exe

[UpdateFW]
UptFirmCmd=Material\Command\cmd_xp.exe
UptFirmParm1=/C "Material\Command\UpdateFW.exe
UptFirmParm2=/l > TestLogs\UpdateFW817.log"
UptFirmSPICmd=Material\Command\SPI_Updater.exe

[ShowResult]
ShowResultCmd=C:\\Windows\\System32\\notepad.exe

[MultiChip]
SlaveIdx0=5
SlaveIdx1=6
SlaveIdx2=7
SlaveIdx3=8

[DiffCheck]
DiffCheckCmd=DiffCheck\Diff_Check.exe
DiffCheckParm=DiffCheck\settings.ini

[SetFWparm]
OnSetParmCmd=SetFWParm\OnlineConfigTool.exe

[ReserveFWparm]
ReserveParmCmd=ReserveParm\OfflineParameter.exe
PreReserveFWParmDelay=0
ReserveFWParmTimeout=5000
SettingFile=ReserveParm\config.ini
ChipOfflineTable=ReserveParm\OfflineTable_Chip.tbl
FwOfflineTable=ReserveParm\OfflineTable_FW.tbl

[I2CTest]
I2CTestCmd=Material\Command\SetBridgeMode.exe
I2CTestParm=0x0f05

[SetPowerInfo]
PowerOnCmd=Material\Command\SetBridgeMode.exe
PowerOffCmd=Material\Command\SetBridgeMode.exe
PowerOnParm=0x0f02
PowerOffParm=0x0f03

[CheckFwId]
CheckFwIdCmd=Material\Command\cmd_xp.exe
CheckFwIdParm1=/C "Material\Command\GetFirmwareId.exe
CheckFwIdParm2=/l > TestLogs\CheckFwId.log"

[GetFirmwareId]
GetFirmwareIdCmd=Material\Command\cmd_xp.exe
GetFirmwareIdParm1=/C Material\Command\GetFirmwareId.exe
GetFirmwareIdParm2=/l > TestLogs\GetFirmwareId.log

[CheckROM]
CheckROMCmd=Material\Command\CheckROM.exe

[CheckTHQA]
CheckTHQACmd=Material\Command\CheckTHQA.exe

[CheckITO]
CheckITOCmd=Material\Command\cmd_xp.exe
CheckITOParm=/C "Material\Command\CheckITO.exe /l > TestLogs\chkito.log"

[IsOkFW]
IsOkFWCmd=Material\Command\isOkFW.exe

[DumpFW]
DumpFWCmd=Material\Command\DumpROM.exe

[RealPortToDisplay]
PortNO=4
RealPort1=1
RealPort2=2
RealPort3=4
RealPort4=3

[LinearTest]
LinearTestIni=LinearTool\LinearConfig.ini
LinearTestCmd=LinearTool\LinearTool.exe

[MultiLinear]
MultiLinearIni=MultiLinearTool\MultiLinearConfig.ini
MultiLinearCmd=MultiLinearTool\MultiLinearTool.exe

[AcerLinearTest]
AcerLinearTestIni=AcerLinearTest\LinearConfig.ini
AcerLinearTestCmd=AcerLinearTest\Acer Linear Sequence Tool.exe

[OpenShort]
DisabledOpenshort=0
OpenShortCmd=Material\Command\OpenShort\OpenShortLightGUI.exe
UserSetIni=Material\Command\OpenShort\UserSet.ini

[ButtonTest]
ButtonTestIni=ButtonTestTool\UserSet.ini
ButtonTestCmd=ButtonTestTool\ButtonTestTool.exe
ButtonTestParm=ButtonTestTool\UserSet.ini ButtonResult.csv

[Item0]
SaveFailRsltPath=LogFile.TMP\Default_NG
SaveResultPath=LogFile.TMP\Default_OK
AutoFirmFile=Material\Firmware\Default
AutoGoldenPath=Material\GoldenSample\Default
OpenShortFile=Material\Command\OpenShort\openshort_default.ini
ThresholdFile=Material\Command\OpenShort\threshold_default.ini
UptFirmParm=/j /ba /w10 /g
UptSPIFirmParm=
CheckBtnNo=1
CheckBtnInval=0
CheckBtnTimeOut=2
GUIFirmFile1=
GUIFirmFile2=
GUIFirmFile3=
GUIFirmFile4=
GUIFirmFile5=
enableLoadSelfSample=0
enableLoadMutualSample=0
namePrefix=#
initialNum=1
enableSerialNum=1
LoadMutualGoldenPath=
LoadSelfGoldenPath=
OperationNO=10
Operation1=CheckFWID
Operation2=None
Operation3=None
Operation4=None
Operation5=None
Operation6=None
Operation7=None
Operation8=None
Operation9=None
Operation10=None

[Item1]
SaveFailRsltPath=LogFile.TMP\ITO1_NG
SaveResultPath=LogFile.TMP\ITO1_OK
AutoFirmFile=Material\Firmware\ITO1
AutoGoldenPath=Material\GoldenSample\ITO1
OpenShortFile=Material\Command\OpenShort\openshort_item1.ini
ThresholdFile=Material\Command\OpenShort\threshold_item1.ini
UptFirmParm=/j /ba /w10 /g
UptSPIFirmParm=
CheckBtnNo=0
CheckBtnInval=0
CheckBtnTimeOut=2
GUIFirmFile1=
GUIFirmFile2=
GUIFirmFile3=
GUIFirmFile4=
GUIFirmFile5=
enableLoadSelfSample=0
enableLoadMutualSample=0
namePrefix=#
initialNum=1
enableSerialNum=1
LoadMutualGoldenPath=
LoadSelfGoldenPath=
OperationNO=10
Operation1=CheckFWID
Operation2=None
Operation3=None
Operation4=None
Operation5=None
Operation6=None
Operation7=None
Operation8=None
Operation9=None
Operation10=None

[Item2]
SaveFailRsltPath=LogFile.TMP\ITO2_NG
SaveResultPath=LogFile.TMP\ITO2_OK
AutoFirmFile=Material\Firmware\ITO2
AutoGoldenPath=Material\GoldenSample\ITO2
OpenShortFile=Material\Command\OpenShort\openshort_item2.ini
ThresholdFile=Material\Command\OpenShort\threshold_item2.ini
UptFirmParm=/j /ba /w10 /g
UptSPIFirmParm=
CheckBtnNo=0
CheckBtnInval=0
CheckBtnTimeOut=2
GUIFirmFile1=
GUIFirmFile2=
GUIFirmFile3=
GUIFirmFile4=
GUIFirmFile5=
enableLoadSelfSample=0
enableLoadMutualSample=0
namePrefix=#
initialNum=1
enableSerialNum=1
LoadMutualGoldenPath=
LoadSelfGoldenPath=
OperationNO=10
Operation1=CheckFWID
Operation2=None
Operation3=None
Operation4=None
Operation5=None
Operation6=None
Operation7=None
Operation8=None
Operation9=None
Operation10=None

[Item3]
SaveFailRsltPath=Log.TMP\ITO3_NG
SaveResultPath=Log.TMP\ITO3_OK
AutoFirmFile=Material\Firmware\ITO3
AutoGoldenPath=Material\GoldenSample\ITO3
OpenShortFile=Material\Command\OpenShort\openshort_item3.ini
ThresholdFile=Material\Command\OpenShort\threshold_item3.ini
UptFirmParm=/j /ba /w10 /g
UptSPIFirmParm=
CheckBtnNo=0
CheckBtnInval=0
CheckBtnTimeOut=2
GUIFirmFile1=
GUIFirmFile2=
GUIFirmFile3=
GUIFirmFile4=
GUIFirmFile5=
enableLoadSelfSample=0
enableLoadMutualSample=0
namePrefix=#
initialNum=1
enableSerialNum=1
LoadMutualGoldenPath=
LoadSelfGoldenPath=
OperationNO=10
Operation1=None
Operation2=None
Operation3=None
Operation4=None
Operation5=None
Operation6=None
Operation7=None
Operation8=None
Operation9=None
Operation10=None

[Item4]
SaveFailRsltPath=Log.TMP\ITO4_NG
SaveResultPath=Log.TMP\ITO4_OK
AutoFirmFile=Material\Firmware\ITO4
AutoGoldenPath=Material\GoldenSample\ITO4
OpenShortFile=Material\Command\OpenShort\openshort_item4.ini
ThresholdFile=Material\Command\OpenShort\threshold_item4.ini
UptFirmParm=/j /ba /w10 /g
UptSPIFirmParm=
CheckBtnNo=0
CheckBtnInval=0
CheckBtnTimeOut=2
GUIFirmFile1=
GUIFirmFile2=
GUIFirmFile3=
GUIFirmFile4=
GUIFirmFile5=
enableLoadSelfSample=0
enableLoadMutualSample=0
namePrefix=#
initialNum=1
enableSerialNum=1
LoadMutualGoldenPath=
LoadSelfGoldenPath=
OperationNO=10
Operation1=None
Operation2=None
Operation3=None
Operation4=None
Operation5=None
Operation6=None
Operation7=None
Operation8=None
Operation9=None
Operation10=None

[SoftReset]
SoftResetCmd=Material\Command\cmd_xp.exe
SoftResetParm=/C "Material\Command\SoftReset.exe /l > TestLogs\SoftReset.log"

[ScanBarCode]
ScanBarCodeIni=ScanBarCode\ScanBarcode.ini
ScanBarCodeCmd=ScanBarCode\ScanBarCode.exe
ScanBarCodeRst=ScanBarCode\ScanBarcodeResult.txt

[Window]
MostTop=0

[TenFingersTest]
TenFingersTestCmd=TenFingerTest\mtgest.exe
TenFingersTestIni=TenFingerTest\MTGesture.ini

[UserDefBat]
UserDefBatCmd=test.bat

[HardCalibration]
Command=Material\Command\cmd_xp.exe
Parm1=/C "Material\Command\ReCalibrate.exe /l > TestLogs\HardCalibration.log"
HasCalibParm=/q
ClearFlagParm=/c
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: ftp, load: 3.65