Netware Driver Installation Overview
For Accton EN2218 Muti-function Adapters
This directory contains Ethernet DOS ODI driver PCMMLID.COM that
supports NetWare 3.x and 4.0; NetWare Lite; and other ODI interface
applications.
PCMMLID.COM : DOS/ODI Driver for NetWare 3.x and 4.0.
( Including Muti-function enabler )
The following instructs you on how to install the Novel NetWare
Ver. 386 DOS ODI Driver.
1. Things You Need
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Before you start with the installation process, make sure you have
the following:
a. Ethernet PCMCIA Hardware Driver Disk.
b. Novell DOS ODI WORKSTATION SERVICES diskette (WSGEN).
2. How To Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
You need the following five files to install DOS ODI DRIVER.
a. LSL.COM ---- supported by Novell
b. PCMMLID.COM ---- Novell DOS ODI Driver, supported
by manufacturer
c. IPXODI.COM ---- supported by Novell
d. NETx.COM ---- supported by Novell
or
EMSNETx.EXE
or
XMSNETx.EXE
e. NET.CFG ---- optional configuration file
After booting your workstation, enter the following commands:
LSL <Enter>
PCMMLID <Enter>
IPXODI <Enter>
NETx <Enter>
you can then login to the file server.
Normally, you will need a NET.CFG file to configure your Ethernet
PCMCIA card.
You can check "Netware 386 Installation, Appendix E" for more
information about NET.CFG.
Below is a sample NET.CFG file:
LINK DRIVER PCMMLID
port 300
int 5
Frame Ethernet_II
Frame Ethernet_802.3
Protocol IPX 0 Ethernet_802.3
:
:
=======================================================================
Important Note:This version PCMMLID.COM do NOT support Windows' Modem Application.
ex: Comit for windows.
=======================================================================
Novell, NetWare, Novell Advanced NetWare are registered
trademarks of Novell Incorporated. Ethernet is registered
trademark of Xerox Corporation. Other trademarks or brand names
unintentionally omitted are trademarks or registered trademarks
of their respective companies.
=======================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.