_______________________________________________________________________________
Printer Driver Extra Kit
Version 2.30
*** Copyright CANON INC. 2015 ***
_______________________________________________________________________________
Contents
1. Introduction
2. System Requirements
3. Precautions During Installation
4. Cautions, Limitations and Restrictions
1. Introduction ---------------------------------------------------------------
Printer Driver Extra Kit is the expansion module for imagePROGRAF Printer
Driver.
Install this module to add the two extra functions to imagePROGRAF Printer
Driver:
Free Layout function allowing the user to arrange multiple images as desired
when printing on roll paper, and Enlargement Copy function using the Color
imageRUNNER MFC.
<Trademarks and Abbreviations>
- Canon, the Canon logo, and imagePROGRAF are trademarks or registered
trademarks of CANON INC.
- Microsoft is a registered trademark of Microsoft Corporation.
- Windows is a trademark or registered trademark of Microsoft Corporation in the
U.S. and/or other countries.
- Windows Vista is a trademark or registered trademark of Microsoft Corporation
in the U.S. and/or other countries.
2. System Requirements --------------------------------------------------------
The following hardware and software are recommended for this software.
Drivers:
Canon imagePROGRAF Printer Driver 2009 V4.20 or later
Recommended operating environment:
Any computer that will successfully run the above driver.
(Caution)
- Cannot be used in an environment where the printer is shared.
3. Precautions During Installation --------------------------------------------
- For more details about installation and uninstallation procedures, please
refer to the user manual.
- You must log into Windows as an Administrator before the installation.
- Before executing installation or uninstallation, be sure to shut down all
software applications.
You cannot install or uninstall with imagePROGRAF Free Layout or
Color imageRUNNER Enlargement Copy running.
- After uninstallation, the install directory may remain.
If there are files in the installation destination folder that are not
managed by Printer Driver Extra Kit, these files and folders are not deleted.
4. Cautions, Limitations and Restrictions -------------------------------------
Note the following limitations when using this software.
<imagePROGRAF Free Layout>
- In some cases a print job with a large amount of data cannot be printed.
In such a case, experiment with the following methods to perform the print
job.
- Add expanded memory to your PC, or enlarge the virtual memory.
- If you are using Adobe Illustrator, switch the on/off setting of
the Bitmap print item in the print dialog box.
- Lower the resolution setting then perform the print again.
- A print job may occasionally fail during continuous printing. If this occurs
delete the registered Custom Setting.
- Sometimes the print preview display may different from the actual print
position.
If this occurs, make a slight adjustment in the position of the object.
- The hues of the print preview and the image displayed in the software
application (Adobe Photoshop, etc.) may be slightly different.
- The appearance of text and fine lines in the print preview may be different
from what you see in the print result.
- If the print job is cancelled, the printer may remain in standby mode.
In this case, click the cancel button and then try to print again after
the software application shuts down.
- Free Layout printing cannot be done during RAW spool printing with the
software application (VectorWorks, Adobe Photoshop LE, Microsoft Photo
Editor, etc.).
- The object may not print at the correct position if the size of the object
is enlarged.
In this case perform the print after positioning the object automatically.
- Sometimes a print job can be lost if imagePROGRAF Free Layout is shut down
during the print job.
- When Borderless Printing is selected, the view including the borders
displayed.
- Depending on the objects, drawing errors may be generated.
If you are using a 32-bit edition of Windows, click the Special Settings
button in the Detailed Settings - Layout sheet to open the Special Settings
dialog box, and remove the check from Fast Graphic Process.
- Occasionally you will not be able to print properly if you apply a favorite
in the Detailed Settings - Favorites sheet in 64-bit editions of Windows.
<Color imageRUNNER Enlargement Copy>
- In some cases a print job with a large amount of data cannot be printed.
In such a case, experiment with the following methods to perform the print
job.
- When using the Sharpen function, specifying a lesser number of sheets
for printing out at one time with Enlargement Copy may correct the
problem.
- Sharpness is not applied for PDF files.
- Occasionally data other than data scanned with imageRUNNER
(including encrypted PDF data) cannot be printed properly.
- Occasionally the enlargement rate is not correct for images scanned from
non-standard paper sizes (smaller than A4) when using larger paper from
the Media Source. Media other than standard sizes are handled differently
by Media Source feed.
- If you perform continuous scanning of different paper sizes, the scanned
size and paper size may not match. Scan media of the same size if you are
going to do continuous scanning.
- Depending on the network settings on your PC, imageRUNNER might not be able
to access your hot folder. Activate the Windows file sharing setting.
- If an error message is displayed while using Color imageRUNNER Enlargement
Copy in a 64-bit edition of Microsoft Windows Vista, temporarily stop and
then restart Color imageRUNNER Enlargement Copy.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.