1. w144t1mux_w_DPSv0201.exe Driver
2. Readme_English.txt File Contents

Readme_English.txt Driver File Contents (w144t1mux_w_DPSv0201.exe)

_______________________________________________________________________________

              imagePROGRAF Direct Print & Share Version 2.0.1
                     *** Copyright CANON INC. 2014 ***
_______________________________________________________________________________

Contents

  1. Introduction
  2. System Requirements
  3. Precautions During Installation
  4. Cautions, Limitations and Restrictions
  5. Cautions When Using the AutoCAD plug-in


1. Introduction ---------------------------------------------------------------

imagePROGRAF Direct Print & Share (hereinafter DPS) is software that allows you 
to directly print files without opening them and to share files via cloud 
storage.
Details on how to use this software are given in the online help.

<Trademarks>
- Canon and imagePROGRAF are trademarks or registered trademarks of Canon Inc.
- Microsoft is a registered trademark of Microsoft Corporation.
- Windows is a trademark or registered trademark of Microsoft Corporation in the 
  U.S. and/or other countries.
- Windows Vista is a trademark or registered trademark of Microsoft Corporation 
  in the U.S. and/or other countries.
- Google, Google Drive and Google Apps are trademarks of Google Inc.
- AutoCAD and other Autodesk product names are trademarks or registered 
  trademarks of Autodesk, Inc. in the United States and other countries.


2. System Requirements --------------------------------------------------------

The following hardware and software are recommended for this software.

  OS:
     Microsoft Windows 8.1 32-bit/64-bit Edition, English edition
     Microsoft Windows 8 32-bit/64-bit Edition, English edition
     Microsoft Windows 7 32-bit/64-bit Edition (Service Pack 1), English edition
     Microsoft Windows Vista 32-bit/64-bit Edition (Service Pack 2), English 
     edition
     Microsoft Windows XP Professional/Home Edition (Service Pack 3), English 
     edition

  Hardware:
     Any computer running the software listed above.
     Processor: Intel Core 2 Duo or equivalent, or faster
     Memory: 2 GB or more (1 GB or more recommended for Windows XP)
     Hard-disk space required for standard installation: approximately 1.5 GB
     Recommended available hard-disk (system drive) space when running this 
       application: 5 GB or more
     Display: XGA (1024x768 pixels) or better, 24-bit color or better

  Printer Driver:
     Canon imagePROGRAF Printer Driver V4.43 or later

  Supported Cloud Service:
     Google Drive

  Versions of AutoCAD Supported by the AutoCAD plug-in:
     AutoCAD 2008 to 2014 (32-bit/64-bit) 


3. Precautions During Installation --------------------------------------------

- Administrative privileges are required for the installation.

- Before performing the installation, close all the other application software.

- If a document is currently being printed out, then wait until printing ends 
  or quit that application.


4. Cautions, Limitations and Restrictions -------------------------------------

Note the following limitations when using this software.

- The file formats that can be printed are as follows.

   V1.7 compliant PDF
   Note: Encryption, JBIG2, font substitution, overprinting, and some 
         transparency processing functions are not supported.

   Rev. 6 compliant TIFF
   Note: Supports the following
    - Color mode: RGB/CMYK/Grayscale/Bilevel
    - Color depth: 24-bit/8-bit/1-bit
    - Compression method: Uncompressed/CCITT/Packbits/LZW/ZIP/JPEG
    - Multipage
    - ICC profiles
    - Number of pixels: 10800 pixels or less horizontally and vertically

   JFIF 1.02 compliant JPEG
   Note: Supports the following
    - Color mode: RGB/Grayscale
    - Color depth: 24-bit/8-bit
    - ICC profiles
    - Number of pixels: 10800 pixels or less horizontally and vertically

   HP-GL/2
   Note: Only the Layout preview is possible for previewing HP-GL/2 format
         files in the following cases (Content preview cannot be used)
    - The printer driver version is 4.52 or later
    - Communication with the printer is possible during file registration

- The page sizes that can be printed are the same as the page sizes that can be 
  used in the printer driver.
   Note: The maximum length is 3.2 m.
   Note: The page size for raster images (tiff or jpeg) is calculated as follows.
      [Page size (inch)] = [Pixel size (pixel)] / [Resolution (dpi)]
    Calculation is performed using 300 dpi as the resolution for raster images 
    that have no resolution information.

- If the page size does not fit within the size that can be used with the 
  printer driver and the file cannot be printed for a raster image (tiff or 
  jpeg), you may be able to print by changing the resolution such as by using an 
  image editing tool.

- Printing cannot be performed via a print server.

- When printing, since files are printed with the top left of the paper as the 
  origin, for data where the image fills the entire page size, the top edge and 
  left edge of the image which are outside the printable area of the printer will 
  not be printed.

- The printing results obtained by using this software might not be the same as 
  the printing results obtained by using other products.

- If the data size or number of files you are registering is too large, you 
  might not be able to print or upload, or it may take an extremely long time 
  depending on your system.
  The following is recommended for the size, etc. of files to register.
   - File size: 2 GB per file or less
   - Number of files to register: 100 files or less
   - Number of pages: 100 pages per file or less
  It is recommended that the total number of pages printed at one time is 100 
  pages or less.

- If the data size or number of files you are uploading or downloading is too 
  large, uploading or downloading may fail or it may take an extremely long time 
  depending on your system.
  The following is recommended for the size, etc. of files to use for uploading 
  or downloading at one time.
   - Total file size: 500 MB or less
   - Total number of files: 100 files or less

- If the folder name or file name is too long, or the folder hierarchy is too
  deep, you might not be able to display the folder name or file name, or 
  upload or download the file.

- Canon shall bear absolutely no responsibility for any damages or liability 
  arising as a result of the cloud service.

- If the same cloud storage is simultaneously accessed from multiple pieces of 
  software including this software, the processing of the other software may be 
  given priority. As a result, the processing results might not be as intended.
  (For example, this includes cases such as when folders are deleted or files are 
  uploaded simultaneously by multiple pieces of software.)

- The cloud service might not be available depending on the country or region 
  where you are using this software.

- To use the cloud service, you first have to create an account for the cloud 
  service.
  Check that you can log into the cloud service using a web browser with the 
  account you created.


5. Cautions When Using the AutoCAD plug-in -------------------------------------

- Do not delete the DWG to PDF driver that is included with AutoCAD. If you 
  delete or rename it, you will not be able to register AutoCAD data with DPS.

- If the size of a document created in AutoCAD is not supported by the DWG to 
  PDF driver, the document is changed to a size supported by the DWG to PDF 
  driver before registering with DPS.

- You might not be able to correctly create a PDF file from data created in 
  AutoCAD in some cases due to limitations in the DWG to PDF driver.