Readme_English.txt Driver File Contents (w142nmux_w_FUT2400_Win64.exe)

_______________________________________________________________________________

       Canon imagePROGRAF Firmware Update Tool 64-bit Edition
                  Version 24.00 (for Windows)
              *** Copyright CANON INC. 2014 ***            
_______________________________________________________________________________

Overview

  1. Introduction
  2. Operation Environment
  3. Version Update Method
  4. Precautions for Use

1. Introduction ---------------------------------------------------------------

You can use this program to update the printer firmware version.

<Trademarks>
Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks 
of CANON INC.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the 
U.S. and/or other countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation 
in the U.S. and/or other countries.

2. Operation Environment ------------------------------------------------------

Use this program with the systems and the operating environments below.

  Software:   Microsoft Windows 8.1 64-bit edition, English edition
              Microsoft Windows Server 2012 R2 64-bit edition, English edition 
              Microsoft Windows 8 64-bit edition, English Edition
              Microsoft Windows Server 2012 64-bit edition, English Edition
              Microsoft Windows 7 64-bit edition, English Edition
              Microsoft Windows Server 2008 R2 64-bit edition, English edition 
              Microsoft Windows Server 2008 64-bit edition, English Edition
              Microsoft Windows Vista 64-bit edition, English Edition
              Microsoft Windows Server 2003 R2 64-bit edition, English edition 
              Microsoft Windows Server 2003 64-bit edition, English Edition

     (Note)
     - Not available on 32-bit version of Windows.
     - For the Windows OS, use the latest version of Service Pack.

  Hardware:   Any computer running the software listed above.

 Printers:   This program is intended for use with the following printers.

                 Canon imagePROGRAF series
                 CS2124/CS2136
                 CS2224/CS2236
                 CS2344
                 CS2424/CS2436
              (Some printer models are available in the limited countries 
               or areas.)

 Interface Connectivity:
  The printer and computer where this program is executed must be connected 
  with either of the following methods.

  - Connected via a TCP/IP network and capable of printing via the network.
  - Connected via a USB or IEEE 1394 port cable and capable of printing 
    as a local printer.

  Note: If you are using IEEE1394, IEEE1394 Class Driver is needed.

3. Version Update Method ------------------------------------------------------

(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard 
 disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) From the Start menu, select Programs to execute imagePROGRAF Firmware 
 Update Tool.

4. Precautions for Use --------------------------------------------------------

The following limitations apply to the use of this program. 
Before using the program, make sure that you understand these limitations.

* You must log into Windows as an Administrator before the installation.

* Before you start the firmware version update program, close any other 
applications that are running.

* Do not try to use the printer while the firmware version update program is 
 running. 
 If a print job is executing, cancel the print job or wait for the job to 
 finish before you execute the version update program.

* Never switch off the target printer while the firmware version update 
 program is running.

* If you are unable to connect to the Internet to get the latest information, 
 perform the following procedure.
 1. Access the Canon website from a computer that can connect to the Internet 
  and download the firmware corresponding to your printer.
 2. Copy the downloaded firmware to the computer where this program is 
  installed.
 3. Run this program, select "Specify the Firmware", and specify the downloaded 
  firmware.

* If the firmware version update fails while writing to the flash ROM, 
  you may not be able to start the printer. In this case, 
  contact a Canon service center or the dealer where you purchased the 
  printer.
______________________________________________________________


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.99