ï»¿_______________________________________________________________________________ imagePROGRAF Status Monitor Version 25.60 imagePROGRAF Device Agent Manager *** Copyright CANON INC. 2015 *** _______________________________________________________________________________ Contents 1. Introduction 2. System Requirements 3. Precautions During Installation 4. Cautions, Limitations and Restrictions 1. Introduction --------------------------------------------------------------- imagePROGRAF Status Monitor is a software utility that monitors the status of the printer and manages print jobs. The Status Monitor contains two screens: the "Printer List" lists the printers, and the "Status Monitor" shows the specific details about each printer. imagePROGRAF Device Agent Manager automatically synchronizes the ink type in the printer with the printer driver ink information. For more information on stopping imagePROGRAF Device Agent Manager select Programs in the Windows Start menu, open Device Agent Manager in imagePROGRAF Status Monitor and refer to the help. <Trademarks> - Canon, NetSpot are registered trademarks or trademarks of Canon Inc. - Microsoft is a registered trademark of Microsoft Corporation. - Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. - Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. - NetWare, Novell, NDPS are registered trademarks of Novell, Inc., in the United States and/or other countries. 2. System Requirements -------------------------------------------------------- The following hardware and software are recommended for this software. Software: Microsoft Windows 8.1, English edition Microsoft Windows 8, English edition Microsoft Windows 7, English edition Microsoft Windows Server 2008, English edition Microsoft Windows Vista, English edition Microsoft Windows Server 2003 R2, English edition Microsoft Windows Server 2003, English edition Microsoft Windows XP, English edition (Note) - Not available on 64-bit version of Windows. - For the Windows OS, use the latest version of Service Pack. Hardware: Any computer running the software listed above. Printers: Canon imagePROGRAF iPF500 Canon imagePROGRAF iPF510 Canon imagePROGRAF iPF5000 Canon imagePROGRAF iPF5100 Canon imagePROGRAF iPF600 Canon imagePROGRAF iPF605 Canon imagePROGRAF iPF610 Canon imagePROGRAF iPF650 Canon imagePROGRAF iPF655 Canon imagePROGRAF iPF670 Series Canon imagePROGRAF iPF680 Series Canon imagePROGRAF iPF6000S Canon imagePROGRAF iPF6100 Canon imagePROGRAF iPF6200 Canon imagePROGRAF iPF6300 Canon imagePROGRAF iPF6300S Canon imagePROGRAF iPF6350 Canon imagePROGRAF iPF6400 Canon imagePROGRAF iPF6400S Series Canon imagePROGRAF iPF6400SE Series Canon imagePROGRAF iPF6410 Canon imagePROGRAF iPF6450 Canon imagePROGRAF iPF6460 Canon imagePROGRAF iPF700 Canon imagePROGRAF iPF710 Canon imagePROGRAF iPF720 Canon imagePROGRAF iPF750 Canon imagePROGRAF iPF755 Canon imagePROGRAF iPF760 Canon imagePROGRAF iPF765 Canon imagePROGRAF iPF770 Series Canon imagePROGRAF iPF780 Series Canon imagePROGRAF iPF810 Canon imagePROGRAF iPF815 Canon imagePROGRAF iPF820 Canon imagePROGRAF iPF825 Canon imagePROGRAF iPF8000 Canon imagePROGRAF iPF8000S Canon imagePROGRAF iPF8010S Canon imagePROGRAF iPF8100 Canon imagePROGRAF iPF8110 Canon imagePROGRAF iPF8300 Canon imagePROGRAF iPF8300S Canon imagePROGRAF iPF8310 Canon imagePROGRAF iPF8310S Canon imagePROGRAF iPF8400 Canon imagePROGRAF iPF8400S Series Canon imagePROGRAF iPF8400SE Series Canon imagePROGRAF iPF8410 Canon imagePROGRAF iPF9000 Canon imagePROGRAF iPF9000S Canon imagePROGRAF iPF9010S Canon imagePROGRAF iPF9100 Canon imagePROGRAF iPF9110 Canon imagePROGRAF iPF9400 Canon imagePROGRAF iPF9400S Canon imagePROGRAF iPF9410 Canon imagePROGRAF iPF9410S Canon imagePROGRAF LP17 Canon imagePROGRAF LP24 Canon Large Format Printer W6200 (Pigment Ink Model) Canon Large Format Printer W6400 (Dye Ink Model) Canon Large Format Printer W6400 (Pigment Ink Model) Canon Large Format Printer W7200 Canon Large Format Printer W7250 Canon Large Format Printer W8200 (Dye Ink Model) Canon Large Format Printer W8200 (Pigment Ink Model) Canon Large Format Printer W8400 (Dye Ink Model) Canon Large Format Printer W8400 (Pigment Ink Model) Canon Business Ink Jet Printer BIJ1300 Canon Business Ink Jet Printer BIJ1350 Canon Business Ink Jet Printer BIJ1350D Canon Business Ink Jet Printer BIJ2300 Canon Business Ink Jet Printer BIJ2350 Canon Office Color Printer N1000 Canon Office Color Printer N1100 Canon Office Color Printer N2000 Canon Office Color Printer N2100 Canon Graphic Color Printer W2200 Canon Graphic Color Printer W2200S CS2024/CS2044 CS2124/CS2136 CS2224/CS2236 CS2344 CS2424/CS2436 (Some printer models are available in the limited countries or areas.) (Note) - Windows versions other than English Windows cannot be used. 3. Precautions During Installation ------------------------------------------- - For more details about installation and uninstallation procedures, please refer to the user manual. - Before executing installation or uninstallation, be sure to shut down all software applications. You cannot install or uninstall with the imagePROGRAF Status Monitor running. - After uninstallation, the install directory may remain. If there are files in the installation destination folder that are not managed by imagePROGRAF Status Monitor, these files and folders are not deleted. - You must log into Windows as an Administrator before the installation. 4. Cautions, Limitations and Restrictions ------------------------------------- Note the following limitations when using this software. - You must deactivate the block on the relevant software in the Windows firewall function to use imagePROGRAF Status Monitor or imagePROGRAF Device Agent Manager. For more information on the Windows firewall function, refer to the Windows help or the Windows manual. - imagePROGRAF Status Monitor may not operate correctly with a terminal server when several users are logged in with the same user name. - More than one Status Monitor cannot be opened for a printer connected through local port. - When using an BIJ1300/BIJ1350/BIJ1350D/BIJ2300/BIJ2350/N1000/N1100/N2000/N2100/W2200 connected through a local port, if you attempt to acquire the device information with the Driver Properties function while imagePROGRAF Status Monitor is acquiring the printer status information an error will occur. If the imagePROGRAF Status Monitor attempts to acquire the printer status information while the Driver Properties function is acquiring the device information an error will occur. - While NetSpot Job Monitor is running for a printer connected through a local port, the imagePROGRAF Status Monitor can neither execute printing nor acquire the printer status information for the same printer connected through a local port. If this occurs, shut down NetSpot Job Monitor. - In a NetSpot Accountant Client Module Ver.3.1 or lower environment with either a standard installation of NetSpot Accountant Client Module, or while NetSpot Suite Service is running, the imagePROGRAF Status Monitor can neither execute printing nor acquire the printer status information for a printer connected through a local port. - The Status Monitor cannot be opened for a shared printer. - While more than one Status Monitor is open for a printer connected to a network, even if the status of the printer changes, the change may not be reflected in all the open Status Monitors at the same time. - When either the Status Print or Nozzle Check Print is executed, the BIJ1300/BIJ1350/BIJ1350D/BIJ2300/BIJ2350/N1000/N1100/N2000/N2100/W2200 will go offline after the print is finished. - If a print job is cancelled with the Status Monitor for a printer detected from the "TCP/IP" or "NetWare" mode display in the Printer List, only the print job inside the printer is deleted. There may be print job remaining in the computer, so you will need to delete this data manually. - The size of the print job inside the printer is not displayed. - The imagePROGRAF Status Monitor may stop operating temporarily if it attempts to acquire The Status of an IPP connected printer that is switched off. - To open the Status Monitor for a printer connected using IPv6, a compatible printer driver must be installed. - If you are using the printer in the NetWare environment, note the following points: (1)To use the imagePROGRAF Status Monitor on a computer, you must have genuine Novell client software installed. (2)NDPS connection is not supported. (3)imagePROGRAF Status Monitor does not support cases where more than one print servers or print objects are related with one print queue. (4)In the NetWare environment, you temporarily may not be able to perform Pause, Resume or Delete functions of the print job from Status Monitor. (5)In a NetWare environment, you might not be able to Pause, Resume, or Delete a printjob from the Status Monitor. (6)The Accounting function does not run in NetWare environments. Start the function from a TCP/IP or USB connection. - You may need to change the settings of your anti-virus software to use the email notice function. For details on changing the settings of your anti-virus software, ask your network administrator or refer to your software guide.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.