_______________________________________________________________________________
imagePROGRAF Status Monitor Version 25.60
imagePROGRAF Device Agent Manager
*** Copyright CANON INC. 2015 ***
_______________________________________________________________________________
Contents
1. Introduction
2. System Requirements
3. Precautions During Installation
4. Cautions, Limitations and Restrictions
1. Introduction ---------------------------------------------------------------
imagePROGRAF Status Monitor is a software utility that monitors the status of
the printer and manages print jobs. The Status Monitor contains two screens:
the "Printer List" lists the printers, and the "Status Monitor" shows the
specific details about each printer.
imagePROGRAF Device Agent Manager automatically synchronizes the ink type in
the printer with the printer driver ink information. For more information on
stopping imagePROGRAF Device Agent Manager select Programs in the Windows
Start menu, open Device Agent Manager in imagePROGRAF Status Monitor and refer
to the help.
<Trademarks>
- Canon, NetSpot are registered trademarks or trademarks of Canon Inc.
- Microsoft is a registered trademark of Microsoft Corporation.
- Windows is a trademark or registered trademark of Microsoft Corporation in the
U.S. and/or other countries.
- Windows Vista is a trademark or registered trademark of Microsoft Corporation
in the U.S. and/or other countries.
- NetWare, Novell, NDPS are registered trademarks of Novell, Inc.,
in the United States and/or other countries.
2. System Requirements --------------------------------------------------------
The following hardware and software are recommended for this software.
Software:
Microsoft Windows 8.1, English edition
Microsoft Windows 8, English edition
Microsoft Windows 7, English edition
Microsoft Windows Server 2008, English edition
Microsoft Windows Vista, English edition
Microsoft Windows Server 2003 R2, English edition
Microsoft Windows Server 2003, English edition
Microsoft Windows XP, English edition
(Note)
- Not available on 64-bit version of Windows.
- For the Windows OS, use the latest version of Service Pack.
Hardware:
Any computer running the software listed above.
Printers:
Canon imagePROGRAF iPF500
Canon imagePROGRAF iPF510
Canon imagePROGRAF iPF5000
Canon imagePROGRAF iPF5100
Canon imagePROGRAF iPF600
Canon imagePROGRAF iPF605
Canon imagePROGRAF iPF610
Canon imagePROGRAF iPF650
Canon imagePROGRAF iPF655
Canon imagePROGRAF iPF670 Series
Canon imagePROGRAF iPF680 Series
Canon imagePROGRAF iPF6000S
Canon imagePROGRAF iPF6100
Canon imagePROGRAF iPF6200
Canon imagePROGRAF iPF6300
Canon imagePROGRAF iPF6300S
Canon imagePROGRAF iPF6350
Canon imagePROGRAF iPF6400
Canon imagePROGRAF iPF6400S Series
Canon imagePROGRAF iPF6400SE Series
Canon imagePROGRAF iPF6410
Canon imagePROGRAF iPF6450
Canon imagePROGRAF iPF6460
Canon imagePROGRAF iPF700
Canon imagePROGRAF iPF710
Canon imagePROGRAF iPF720
Canon imagePROGRAF iPF750
Canon imagePROGRAF iPF755
Canon imagePROGRAF iPF760
Canon imagePROGRAF iPF765
Canon imagePROGRAF iPF770 Series
Canon imagePROGRAF iPF780 Series
Canon imagePROGRAF iPF810
Canon imagePROGRAF iPF815
Canon imagePROGRAF iPF820
Canon imagePROGRAF iPF825
Canon imagePROGRAF iPF8000
Canon imagePROGRAF iPF8000S
Canon imagePROGRAF iPF8010S
Canon imagePROGRAF iPF8100
Canon imagePROGRAF iPF8110
Canon imagePROGRAF iPF8300
Canon imagePROGRAF iPF8300S
Canon imagePROGRAF iPF8310
Canon imagePROGRAF iPF8310S
Canon imagePROGRAF iPF8400
Canon imagePROGRAF iPF8400S Series
Canon imagePROGRAF iPF8400SE Series
Canon imagePROGRAF iPF8410
Canon imagePROGRAF iPF9000
Canon imagePROGRAF iPF9000S
Canon imagePROGRAF iPF9010S
Canon imagePROGRAF iPF9100
Canon imagePROGRAF iPF9110
Canon imagePROGRAF iPF9400
Canon imagePROGRAF iPF9400S
Canon imagePROGRAF iPF9410
Canon imagePROGRAF iPF9410S
Canon imagePROGRAF LP17
Canon imagePROGRAF LP24
Canon Large Format Printer W6200 (Pigment Ink Model)
Canon Large Format Printer W6400 (Dye Ink Model)
Canon Large Format Printer W6400 (Pigment Ink Model)
Canon Large Format Printer W7200
Canon Large Format Printer W7250
Canon Large Format Printer W8200 (Dye Ink Model)
Canon Large Format Printer W8200 (Pigment Ink Model)
Canon Large Format Printer W8400 (Dye Ink Model)
Canon Large Format Printer W8400 (Pigment Ink Model)
Canon Business Ink Jet Printer BIJ1300
Canon Business Ink Jet Printer BIJ1350
Canon Business Ink Jet Printer BIJ1350D
Canon Business Ink Jet Printer BIJ2300
Canon Business Ink Jet Printer BIJ2350
Canon Office Color Printer N1000
Canon Office Color Printer N1100
Canon Office Color Printer N2000
Canon Office Color Printer N2100
Canon Graphic Color Printer W2200
Canon Graphic Color Printer W2200S
CS2024/CS2044
CS2124/CS2136
CS2224/CS2236
CS2344
CS2424/CS2436
(Some printer models are available in the limited countries or areas.)
(Note)
- Windows versions other than English Windows cannot be used.
3. Precautions During Installation -------------------------------------------
- For more details about installation and uninstallation procedures, please
refer to the user manual.
- Before executing installation or uninstallation, be sure to shut down all
software applications.
You cannot install or uninstall with the imagePROGRAF Status Monitor running.
- After uninstallation, the install directory may remain.
If there are files in the installation destination folder that are not
managed by imagePROGRAF Status Monitor, these files and folders are not
deleted.
- You must log into Windows as an Administrator before the installation.
4. Cautions, Limitations and Restrictions -------------------------------------
Note the following limitations when using this software.
- You must deactivate the block on the relevant software in the Windows
firewall function to use imagePROGRAF Status Monitor or imagePROGRAF Device
Agent Manager.
For more information on the Windows firewall function, refer to the Windows
help or the Windows manual.
- imagePROGRAF Status Monitor may not operate correctly with a terminal server
when several users are logged in with the same user name.
- More than one Status Monitor cannot be opened for a printer connected
through local port.
- When using an
BIJ1300/BIJ1350/BIJ1350D/BIJ2300/BIJ2350/N1000/N1100/N2000/N2100/W2200
connected through a local port, if you attempt to acquire the device
information with the Driver Properties function while imagePROGRAF Status
Monitor is acquiring the printer status information an error will occur.
If the imagePROGRAF Status Monitor attempts to acquire the printer status
information while the Driver Properties function is acquiring the device
information an error will occur.
- While NetSpot Job Monitor is running for a printer connected through a local
port, the imagePROGRAF Status Monitor can neither execute printing nor
acquire the printer status information for the same printer connected
through a local port.
If this occurs, shut down NetSpot Job Monitor.
- In a NetSpot Accountant Client Module Ver.3.1 or lower environment with
either a standard installation of NetSpot Accountant Client Module, or while
NetSpot Suite Service is running, the imagePROGRAF Status Monitor can
neither execute printing nor acquire the printer status information for a
printer connected through a local port.
- The Status Monitor cannot be opened for a shared printer.
- While more than one Status Monitor is open for a printer connected to a
network, even if the status of the printer changes, the change may not be
reflected in all the open Status Monitors at the same time.
- When either the Status Print or Nozzle Check Print is executed, the
BIJ1300/BIJ1350/BIJ1350D/BIJ2300/BIJ2350/N1000/N1100/N2000/N2100/W2200
will go offline after the print is finished.
- If a print job is cancelled with the Status Monitor for a printer detected
from the "TCP/IP" or "NetWare" mode display in the Printer List, only the
print job inside the printer is deleted. There may be print job remaining in
the computer, so you will need to delete this data manually.
- The size of the print job inside the printer is not displayed.
- The imagePROGRAF Status Monitor may stop operating temporarily if it
attempts to acquire The Status of an IPP connected printer that is
switched off.
- To open the Status Monitor for a printer connected using IPv6,
a compatible printer driver must be installed.
- If you are using the printer in the NetWare environment, note the following
points:
(1)To use the imagePROGRAF Status Monitor on a computer, you must have genuine
Novell client software installed.
(2)NDPS connection is not supported.
(3)imagePROGRAF Status Monitor does not support cases where more than one
print servers or print objects are related with one print queue.
(4)In the NetWare environment, you temporarily may not be able to perform
Pause, Resume or Delete functions of the print job from Status Monitor.
(5)In a NetWare environment, you might not be able to Pause, Resume, or Delete
a printjob from the Status Monitor.
(6)The Accounting function does not run in NetWare environments.
Start the function from a TCP/IP or USB connection.
- You may need to change the settings of your anti-virus software to use the
email notice function.
For details on changing the settings of your anti-virus software,
ask your network administrator or refer to your software guide.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.