Accton EN2218 Multi-function PC Card Microsoft Windows NT 3.51 and NT 4.0 Driver Installation File Descriptions: OEMSETUP.INF EN2218 Device Information File EN2218NT.SYS EN2218 Microsoft Windows NT 3.51 and 4.0 driver EN2218NT.HLP EN2218 Installation help file ETHPCMDM.INF Modem device Information file README.TXT This file Note: Currently the Windows NT 3.51 and 4.0 driver has simultaneous LAN and Modem support only for notebooks with the Intel PCIC compatible PCMCIA controller. For notebooks with other types of PCMCIA controllers, if you install EN2218NT.SYS, only the LAN function will be working. To use the modem function, do not install EN2218NT.SYS as described below. All you have to do is to insert this card into a PCMCIA slot, and Windows NT 3.51 or 4.0 enables the card as a modem card automatically. Windows NT 3.51 Installation Procedure: 1) In the Main group of NT, select the Control Panel icon. 2) In the Control Panel window, select the Network icon. 3) In the Network Settings dialog box, select the Add Adapter button. The Add Network Adapter dialog box appears. 4) In the list of network cards, select "<other> Requires disk from manufacturer", and click the <Enter> button. 5) Insert the driver diskette in a diskette drive. Enter drive and pathname (e.g. A:\WINNT) and click the OK button. 6) In the Select OEM Option dialog box, you will see "Accton EN2218 Multi-function PC Card" in the menu. Click the OK button to install it. 7) The "Accton EN2218 Multi-function PC Card LAN Setup" dialog box appears. Select the proper values for the "LAN IRQ Level," "Memory Base Address," and "LAN I/O Port Address." Please make sure the resource values you selected are not in use by any other device in the system. Press the OK button. 8) The "Accton EN2218 Multi-function PC Card Modem Setup" dialog box appears. Select the proper values for the "Modem IRQ Level," " Modem COM Port," and "Modem I/O Port." Please make sure you do not select the same Modem IRQ value as that for the LAN. Press the OK Button. The typical modem IRQ and I/O port assignments are shown below: COM1: IRQ 4, I/O Port 0x3F8 (0x represents hexadecimal number.) COM2: IRQ 3, I/O Port 0x2F8. COM3: IRQ 4, I/O Port 0x3E8. COM4: IRQ 3, I/O Port 0x2E8. 9) Windows NT now copies EN2218NT.SYS from the driver diskette to C:\WINNT\SYSTEM32\DRIVERS, and the OEMSETUP.INF file to C:\WINNT\SYSTEM32; but renamed it to another installation information file. The next time when you add the adapters to your system, you do not need the driver diskette again. 10) To complete installation, bind the adapter to transport drivers by selecting the "Bindings" button under the "Network Setting" dialog box. 11) Restart the system to bring up the network and modem. 12) When Windows NT restarts, the network should be functioning. You should also be able to use the modem installed on the COM port you selected in step 8. Windows NT 4.0 Installation Procedure: 1) In the Control Panel, double click on the "Network" icon, and the "Network" window appears. Select the "Adapters" tab, and press the "Add" button. The "Select Network Adapter" window appears. 2) Press the "Have Disk" button. Insert the driver diskette in the floppy disk drive. In the "Insert Disk" dialog box, enter the name of the directory in which the driver and installation files reside (e.g. A:\WINNT,) and then press the OK button. 3) The "Select OEM Option" window appears, with "Accton EN2218 Multi-function PC Card" listed in the window. Press the OK button. 4) The "Accton EN2218 Multi-function PC Card LAN Setup" dialog box appears. Select the proper values for the "LAN IRQ Level," "Memory Base Address," and "LAN I/O Port Address." Please make sure the resource values you selected are not in use by any other device in the system. Press the OK button. 5) The "Accton EN2218 Multi-function PC Card Modem Setup" dialog box appears. Select the proper values for the "Modem IRQ Level," "Modem COM Port," and "Modem I/O Port." Please make sure you do not select the same Modem IRQ value as that for the LAN. Press the OK Button. The typical modem IRQ and I/O port assignments are shown below: COM1: IRQ 4, I/O Port 0x3F8 (0x represents hexadecimal number.) COM2: IRQ 3, I/O Port 0x2F8. COM3: IRQ 4, I/O Port 0x3E8. COM4: IRQ 3, I/O Port 0x2E8. 6) Windows NT then copies files from the driver diskette to the Windows NT system directory. When this is done, click the Close button. NT goes through a network configuration process. When NT asks you to restart the computer, do so. 7) When Windows NT is restarted, you have to install the modem. Select the Modem icon in the Control Panel. An "Install New Modem" window appears. Check the "Don't detect my modem; I will select it from a list" box. Click the "Next" button. 8) Windows NT presents a list of modem models. Select the "Have Disk" option. An "Install From Disk" window appears. Insert the driver diskette in the floppy drive. In the "Copy manufacturer's file from" dialog box, enter the name of the directory in which the driver and installation files reside (e.g. A:\WINNT,) and then click the OK button. 9) Windows NT displays the model "Accton EN2218 PC Card (modem)". Click the "Next" button. 10) Windows NT prompts you to selec the COM port for the modem. Click on the "Select ports" option and highlight the COM port which you selected in Step 5. Click the "Next" button. 11) Windows NT displays "Your modem has been set up successfully." Click the Finish button. 12) The "Modems Properties" window appears. Configure the modem with appropriate properties, then click the Close button. The modem is now functioning. Trouble shooting hints: It is vital for the user to assign non-conflicting resources to the EN2218 LAN and modem devices. Windows NT is not a plug-and-play system. It is the user's responsibility to make sure the resources assigned to the LAN and to the modem device are not already occupied by some other device in the system. If at Windows NT initialization the Service Control Manager displays the message "At least one service or driver failed during System Startup. Use Event Viewer to examine the event log for details," the user should follow this instruction to view the System Log file to check if the failure is related to EN2218. If either the EN2218 LAN or modem function fails, more than likely it is due to a resource conflict. The user can follow these steps to examine the resources currently in use: 1) Click on the "Start" button. 2) Select "Programs," "Administrative tools," and "Windows NT diagnostics." 3) Select the "Resource" tab. 4) Click the "IRQ" button to see the IRQ's that are already assigned. When the user allocates an IRQ to the EN2218 LAN or modem function, the IRQ must not be in use by another device. 5) Click the "I/O Port" to see the I/O ports in use. When the user allocates a set of I/O addresses to the LAN or modem function, the I/O addresses must not be in use by another device. 6) Click the "Memory" button to see the memory range in use. If the user assigns conflicting resources, the symptom varies. The system may appear to hang at initialization, at the shutdown stage, or during the course of operation. In these cases, the user should remove the EN2218 card, and restart the system without the card in a PCMCIA slot. After the system comes up, the user can select a different set of resources, insert EN2218 back into the slot, and restart the system. Trademarks: Microsoft Windows NT is a trademark of Microsoft Corporation.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.