Accton Technology Corp.
NDIS DRIVER FOR WINDOWS FOR WORKGROUPS 3.11 INSTALLATION
========================================================
Copyright (c) 1994, 1995 Accton Technology Corporation.
All rights reserved.
Contents:
--------
A) Install NDIS 2.0 driver for WFW 3.11
B) Install NDIS 3.0 driver for WFW 3.11
A) Install NDIS 2.0 driver for WFW 3.11
The driver "ETHPCM.DOS" contained in directory
\NDIS conforms to the Network Driver Interface
Specification (NDIS) 2.0 defined by Microsoft/3Com.
ACCOPEN.EXE should be added in the CONFIG.SYS file in the following
format:
DEVICE=C:\WINDOWS\ACCOPEN.EXE /INT=5 /PORT=300
INT and PORT specify the Interrupt and the I/O port number
respectively that you intend to use with the PCMCIA Adapter.
This statement should be added after the Card Service driver statement
in CONFIG.SYS.
NDIS 2.0 Driver Installation for Windows for Workgroups
-------------------------------------------------------
1. Start Windows by typing WIN from the DOS prompt.
2. Click the "Network" icon in the Main Program
Group.
3. Click the "Network Setup" icon from the Network window.
4. Select the "Drivers" item from the Network Setup dialog box.
5. Select the "Add Adapters" item in the Option dialog box.
6. Select "Unlisted or Updated Network Adapter" when the
Install driver field appears.
7. Type destination drive and path name on your PC.
Make sure the full path of the directory (i.e. A:\NDIS)
is given.
8. Insert the Driver Diskette in your floppy drive
and press <Enter> to start the installation process.
9. When the "Accton Ethernet PCMCIA Adapter -16" dialog box appears,
select the right interrupt number and I/O address.
10.Follow on-screen instructions to complete the process.
11.Restart your computer.
Sample Configuration Files
--------------------------
1. CONFIG.SYS File
DEVICE=C:\DOS\SETVER.EXE
DEVICE=C:\WFW311\HIMEM.SYS
DEVICE=C:\WFW311\ACCOPEN.EXE /INT=5 /PORT=300 <-- PCMCIA Adapter enabler
DEVICE=C:\WFW311\IFSHLP.SYS
DOS=HIGH,UMB
FILES=30
buffers=30
FCBS=16,8
LASTDRIVE=y
2. AUTOEXEC.BAT File
C:\WFW311\net start
C:\WFW311\SMARTDRV.EXE
@ECHO OFF
PROMPT $p$g
PATH C:\WFW311;
SET TEMP=C:\WFW311\TEMP
3. PROTOCOL.INI File on Windows for Workgroups 3.11
[network.setup]
version=0x3110
netcard=en2212d,1,en2212d,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,NETBEUI
lana0=en2212d,1,ms$netbeui
lana1=en2212d,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=EN2212D
[NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=EN2212D
LANABASE=0
[EN2212D]
DriverName=ETHPCM$
irq = 5
iobase = 0x300
B) Install NDIS 3.0 driver for WFW 3.11
The driver "PCM311.386" contained in directory
\WFW311 conforms to the Network Driver Interface
Specification (NDIS) 3.0 defined by Microsoft.
ACCOPEN.EXE should be added in the CONFIG.SYS file in the following
format:
DEVICE=C:\WINDOWS\ACCOPEN.EXE /INT=5 /PORT=300
INT and PORT specify the Interrupt and the I/O port number
respectively that you intend to use with the PCMCIA Adapter.
This statement should be added after the Card Service driver statement
in CONFIG.SYS.
NDIS 3.0 Driver Installation for Windows for Workgroups 3.11
------------------------------------------------------------
1. Run Windows by typing WIN from the DOS prompt.
2. Click the "Network" icon in the Main Program
Group.
3. Click the "Network Setup" icon from the Network window.
4. Select "Networks" in the Network Setup window.
5. Select "Install Microsoft Windows Network" from the Networks window.
6. Select "Drivers" from the Network Setup window.
7. Select "Add Adapter" item in the Option Dialog box.
8. Select the "Unlisted or Updated Network Adapter" when the
Install driver field appears.
9. Type destination drive and path name in your PC.
10. Make sure the full path of the directory (i.e. A:\WFW311)
is given.
11. Insert the PCMCIA Driver Diskette in your floppy drive
and press <Enter> to start the installation process.
12. When the "Accton Ethernet PCMCIA Adapter" dialog box appears,
select the right interrupt number; I/O address and select "Close".
13. Follow the on-screen instructions to complete the process.
Sample Configuration Files
--------------------------
1. CONFIG.SYS File
FILES=30
BUFFERS=30
LASTDRIVE=Z
DEVICE=C:\WFW311\HIMEM.SYS
DEVICE=C:\WFW311\ACCOPEN.EXE /INT=5 /PORT=300 <-- PCMCIA Adapter enabler
DEVICE=C:\WFW311\IFSHLP.SYS
STACKS=9,256
2. AUTOEXEC.BAT File
C:\WFW311\SMARTDRV.EXE
C:\WFW311\net start
PATH C:\WFW311;
SET TEMP=C:\WFW311\TEMP
3. PROTOCOL.INI File on Windows for Workgroups 3.11
[network.setup]
version=0x3110
netcard=ms$en2212,1,MS$EN2212,2
transport=ms$netbeui,NETBEUI
lana0=ms$en2212,1,ms$netbeui
[MS$en2212]
DriverName=MS2000$
INTERRUPT=5
IOBASE=0x300
[EN2212]
adapters=MS$EN2212
[NETBEUI]
BINDINGS=MS$EN2212
LANABASE=0
SESSIONS=10
NCBS=12
4. SYSTEM.INI
[386Enh]
netcard=pcm311.386
===End===
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.