1. en2212.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (en2212.zip)

This directory contains Accton's Ethernet DOS/ODI drivers that
support NetWare version 3.x and 4.0, NetWare Lite, and other ODI interface
applications.

             PCMMLID.COM : DOS/ODI Driver for NetWare 3.x and 4.0.
             MPXPCM.COM :  DOS/ODI MPX Driver for NetWare 3.x only.
                           This driver offers higher performance under
                           the NetWare 3.x environment.

To make installation easier when using 1STEP with NetWare 4.0, we also put
a copy of "PCMMLID.COM" in the c:\DOS subdirectory.

Note that the PCMCIA Adapter Enabler, ACCOPEN.EXE, must be executed
before using either the PCMMLID.COM or MPXPCM.COM driver.

This version of "PCMMLID.COM" provides the "Hot-Swap" capability.  This
capability works only when a Card Service driver is installed.  This 
function has the following new features under the NETX and VLM environments:

* After logging on to a Novell server, if the current drive is a net 
  drive (e.g. N:), and the user is at the DOS prompt, 
  the removal of the PCMCIA network adapter will cause the current drive to
  be switched to the local drive (e.g. C:.)  If the adapter is reinserted
  before the network operating system time-outs, the current drive will
  be switched back to the original net drive (i.e. N:.).

* After logging on to a Novell server, the removal of the network adapter
  in the middle of a network application suspends the application.
  If the adapter is inserted back before the network time-outs, the network
  application resumes.

  It is however, not advisable to remove the network adapter in the middle
  of an active network session.  This may corrupt data in transmission and
  cause the session to hang.  It is only recommended to remove a network
  adapter at the DOS prompt.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.