Accton EN2212 Ethernet PCMCIA Adapter
NDIS Driver for LAN Server Installation
=========================================
The driver ETHPCM.DOS contained in directory \NDIS\DOS is used for
Accton Ethernet PCMCIA adapters in the LAN Server environment.
This driver conforms to the Network Driver Interface Specification
(NDIS) 2.0 defined by Microsoft/3Com.
1. DOS LAN REQUESTER
=======================
a. At the DOS prompt, insert the IBM LAN Support Program (LSP)
Version 1.3x Diskette into the disk drive (A: or B: ).
b. Type "dxmaid". The IBM logo appears.
c. Press <Enter> twice. The Environment Information screen appears.
d. Specify the values for the following fields on this screen.
Use the <Space Bar> to toggle between selections.
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Do you need 802.2 interface support? Yes
Type change as needed to the drive and directory fields:
Source for LSP A:\
Target for new configuration C:\lsp
e. Make sure the values are correct. Press <Enter> to store your choices.
"Process Adapter Option Diskette" screen appears.
f. Insert the Driver Diskette in the source drive and specify the
path: A:\NDIS\DOS or B:\NDIS\DOS. Press <Enter>.
g. The files are copied from the Driver Diskette to the
target directory on the hard disk.
h. Press <Enter> three times.
i. Insert the LSP diskette and press <Enter>.
The "Current Configuration" screen appears with the Accton EN2212
series adapter and protocols already selected ("IBM IEEE 802.2"
and "IBM OS/2 NETBIOS").
j. Press F4. LSP is installed completely.
k. Use a text editor to edit the CONFIG.SYS file. Specify at least
20 files in the FILES= line, like this:
FILES=20
Save the CONFIG.SYS file, and reboot the computer.
l. Insert the DOS LAN Requester Install Diskette 1.
m. Type: install. Press <Enter>. The IBM logo appears. Press <Enter>.
n. Press <Enter> two more times.
The program prompts you for the pathname of the DOS LAN
Requester directory.
o. Specify the pathname for the DOS LAN Requester directory.
(C:\DOSLAN is the default.) Press <Enter>.
The program asks you which services you require.
p. Highlight either the "Send messages" or "Send, View, Edit, and
Log messages" option. (Normally, you select the second option.)
Press <Enter> to confirm your selection.
q. Specify the machine's ID and the domain ID. The domain ID must
be the domain server ID and must be the same for all
workstations on the network.
r. Follow the prompts to complete the installation.
-- THE END --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.