Accton EN166X Pnp ISA Combo Adapter
SOFTWARE INSTALLATION INSTRUCTIONS
FOR NOVELL ODI DOS CLIENT DRIVER
Copyright (c) 1994, 1995 by Accton Technology
Corporation. All rights reserved.
This file describes the contents of the \DOS
subdirectory. For more detailed information about
NetWare installation, please refer to the
"NOVELL NetWare ODI Shell for DOS" manual.
File Description
----------------
------------------------------------------------------
Filename Description
------------------------------------------------------
LSL.COM This file implements the Link Support
Layer for DOS ODI workstations
and is the program that is generally
loaded first when booting. The Link
Support Layer file enables the
workstation to communicate over
several protocols.
IPXODI.COM This is Novell's protocol stack for
DOS ODI workstations. It performs
the same functions as the IPX.COM, which
is used for DOS workstations. However
it is optional and is loaded after the
LAN driver. Other protocols can be loaded
in its place or with it. This is one
of the key features of the ODI
environment.
NETX.COM NetWare Network program.
--------------------------------------
If you use You Need
--------------------------------------
Conventional memory NETx.COM
Expanded memory EMSNETx.EXE
(LIM 4.0 EMS Compatible)
Extended memory XMSNETx.EXE
(XMS 2.0 compatible)
---------------------------------------
NETBIOS.EXE The Netbios emulation program
(INT 5CH interface) allows you to
run Netbios application programs
based on the NETBIOS.EXE
interface. The running sequence is:
a. IPX shell driver
IPX.COM
NETBIOS.EXE ---> netbios emulation
... interface
b. DOS ODI driver
LSL.COM
MPX2PNP.COM ---> Accton MPX2 DOS ODI driver
IPXODI.COM
NETBIOS.EXE
...
RXMONSTK.COM RXMONSTK.COM is Receive Monitor Utility for
Monitor Type Applications (Such as Lan Analyzer)
If the monitor type applications you are using seems to
stop receiving network packets when you install a new LAN
driver on your workstation, load the RXMONSTK.COM file.
Load the RXMONSTK.COM file after the LSL.COM driver but
before the LAN driver. The RXMONSTK.COM operates as a TSR
and requires 2684 bytes of memory. You can load only one
LAN driver when using the RxMonStk.
The running sequence is:
LSL.COM
RXMONSTK.COM
MPX2PNP.COM ---> Accton MPX2 DOS ODI driver
IPXODI.COM
...
Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
the your NetWare operating system is properly installed.
1. Run the following command in the order given below and
press <Enter>:
lsl
MPX2PNP
ipxodi
netx
2. You can now log into your network.
------End of File----
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.