Accton Technology Corporation
SET166 Hardware configuration program
=====================================
Copyright (c) 1996, 1997 by Accton Technology Corporation.
All rights reserved.
SET166 is a EN166x hardware configuration program which can run
as a batch file to change EN166x's hardware setting.
A) Command Line Syntax:
====================
SET166 to configure the adaptor with the file SET166.DAT.
SET166 ? to show the syntax description
B) Syntax of Configuration File SET166.DAT
=======================================
{TestOnly} or {CardConfigMode[,]IOBase[,]IRQ[,]BootRomAddr[,]MediumType[,]Duplex}
where TestOnly= 'T' or 't' for test only,
i.e. test without modifying the card configuration;
CardConfigMode= 'P' or 'p' for PnP mode,
'N' or 'n' for non-PnP mode;
IOBase= 200h,220h,240h,260h,280h,2a0h,2c0h,2e0h,
300h,320h,340h,360h,380h,3a0h,3c0h,or 3e0h;
IRQ= 3,4,5,9,a,b,c,or f;
BROMAddr= c000,c400,c800,cc00,d000,d400,d800,dc00;
0 for disabling the boot ROM;
MediumType= 'A' or 'a' for auto detect (twisted-pair or BNC),
'I' or 'i' for AUI;
Duplex= 'F' or 'f' for full duplex,
'H' or 'h' for half duplex.
Examples:
Example 1: p,280,a,dc00,A,f
set EN166x to PnP mode, Iobase=280h, Irq=10, BootRomAddress=DC000h,
MediaType=AUTO, Full Duplex mode
Example 2: N 320 5 0000 i H
set EN166x to Jumpless(NE2000) mode, Iobase=320h, Irq=5, BootRom disable
MediaType=AUI, Half Duplex mode
Example 3: t
Just test adapter with current configuration
C) Test Results Return Codes
=========================
00 test/configure OK
01 can't open configuration file
02 syntax error in configuration file
03 can't find LAN card
04 RAM error
----- End Of File -----
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.