================================================================= | ACCTON TECHNOLOGY CORPORATION | | EN166x ISA-bus Ethernet Adapter | | SCO OpenServer MDI DRIVER INSTALLATION | | | | Copyright 1998, ACCTON Technology Corporation | | All rights reserved. | ================================================================= Your Driver Diskette should contain the following files in the subdirectory \SCOUNIX.5: -------------------------------------------------------------- Files Contents -------------------------------------------------------------- SCO5UNIX.TXT Text file about driver installation for the UNIX SCO5 Server UNIXDRVR.114 EN166x Ethernet device drivers packaged for UNIX -------------------------------------------------------------- Introduction ------------- This is the ISA Ethernet Adapter EN166x SCO Unix OpenServer MDI driver R1.1.4. It is a custom installable MDI driver, configured using netconfig. The MDI driver requires the following hardware and software: - Accton EN166x PnP ISA Ethernet Adapter - SCO Unix OpenServer Release 5.0.0 or higher version. >>> NOTE <<< The EN166x adapter should not be programmed in the Plug-and-Play (PnP) mode, otherwise, that adapter will be installed incorrectly because the PnP feature is still not supported on SCO OpenServer Release 5. Installation Procedure ---------------------- 1. Prepare a formatted diskette on any DOS machine. For example, type: C>format a: Note: Make sure your diskette is free from bad sectors. Verify this using the DOS CHKDSK command. 2. Now log into the UNIX system as supervisor (root) and enter Maintenance mode. (Note: Make sure that the current directory is "/" using UNIX command - pwd.) Please follow the steps shown below to uncompress the package file: > cd /tmp (and inserts the package floppy into the proper drive, i.e. a:) > doscp a:/scounix.5/unixdrvr.114 ./en166xdriver (then replaces with the formatted diskette prepared in step 1) > #dd if=./en166xdriver of=/dev/rfd0135ds18 (Note: Use another device file name if you use a different floppy drive) The package installation diskette is now ready for use. 3. The following sections describe the configuration of the driver. We recommend executing these instructions in a singler-user environment. Run the custom utility and select the "Install new package" option. It will prompt you to insert "Accton EN166x EtherNet Adapter Driver" Floppy Volume 1. After running the custom utility and the new package is installed, you should use the "netconfig" command to add the driver into your system as in step 4 below. 4. Run "netconfig". Add the desired chain. The Accton EN166x drivers are called: actn0, actn1, actn2, actn3. Remember the actn0 must be configured first, before any other driver is configured. 5. When the chain has been configured, select 'q' from the netconfig menu. and relink the kernel at the prompt. 6. To active the adapter, you must reboot. When the system boots, you should see the following message among the other configuration messages: %actn0 0x0300-0x0319 3 - type=EN166x addr=00-00-e8-xx-xx-xx with the appropriate I/O addresses, IRQ, Adapter Type and MAC address. The display of the last three bytes of the MAC address depends on the adapter currently plugged onto your system. 7. If you encounter any problems during installation, (i.e., an error message appears on screen) call your dealer for assistance. Trademarks ---------- All trademarks or brand names mentioned are properties of their respective companies. ===End of File===Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.