================================================================================
KM-NET Printer Disk Manager
================================================================================
[0. Table of Contents]
1. Main Features of the Utilities
2. Operating System Requirements and Notes for Installation
2-1. Windows 2000, XP
2-2. Windows NT 4.0
2-3. Windows 98, 98 SE, Me
3. Frequently Asked Questions
4. Kyocera Mita home page
5. Supplement
[1. Main Features of the Utilities]
This utility manages the Job Storage and data management features available when
using a storage device.
[2. Operating System Requirements and Notes for Installation]
- Please update your operating system with the latest Service Pack
in order to maintain reliability.
- With some printing devices, this utility is unable to communicate via LPT and
COM port.
2-1. For the Microsoft Windows 2000, or Windows XP operating systems
- Administrator rights are required for installation.
<Notes when connected to LPT, USB or COM>
- If you are connected via LPT, USB or COM, please verify that a
Kyocera Mita KX driver has previously been installed.
The utility cannot be used if a Kyocera Mita KX driver has not
been installed.
<Notes when connected to network>
- Please verify that TCP/IP or the IPX protocol is installed.
- You cannot print or delete jobs wity an IPX connection.
IPX will only display the list of jobs.
2-2. For the Windows NT 4.0 operating system
- Please verify Service Pack 5 or higher is installed.
- Administrator rights are required for installation.
<Notes when connected to LPT, USB or COM>
- If you are connected via LPT or COM, please verify that a
Kyocera Mita KX driver has previously been installed.
The utility cannot be used if a Kyocera Mita KX driver has not
been installed.
- USB connections are not supported.
<Notes when connected to network>
- Please verify TCP/IP or IPX protocol is installed.
- You cannot print or delete jobs in IPX connection.
IPX will only display the list of jobs.
2-3. For the Windows 98, 98 SE, or Millennium operating systems
<Notes when connected to LPT, USB or COM>
- If you are connected via LPT, USB or COM, please verify that a
Kyocera Mita KX driver has previously been installed.
The utility cannot be used if a Kyocera Mita KX driver has not
been installed.
<Notes when connected to network>
- Please verify that TCP/IP or the IPX protocol is installed.
- You cannot print or delete jobs with an IPX connection.
It will only display the list of jobs.
[3. Frequently Asked Questions]
Q: Cannot open the utility.
A1: Are you using an older version of Microsoft Internet Explorer?
If so, please update to Microsoft Internet Explorer to 5.01 or higher.
A2:This software does not support Windows 95 and 95 OSR2.
Q: Cannot connect to printer.
A1: If the printer is connected to LPT, USB or COM:
In order to connect with LPT, USB or COM, a Kyocera Mita KX driver needs to
be installed.
Please verify whether your current operating system complies with
section [2. Supported Environment and Notes during Installation]
With certain printing device models, this utility is not able to
communicate via LPT and COM port.
A2: If the printer is connected to a network:
When connecting a printer to a network, the TCP/IP or IPX protocol
needs to be installed.
Q: How do I save print jobs?
A: Jobs can be saved using the e-MPS (Job Storage) feature in the Kyocera Mita KX
driver. Please see the specification for details.
[4. Kyocera Mita home page]
http://www.kyoceramita.com
[5. Supplement]
Company and product names shown are the trademarks or registered trademarks.
Copyright (C) 1999 KYOCERA CORPORATION
Copyright (C) 2004 Revised Edition KYOCERA MITA CORPORATION
All Rights Reserved.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.