How to upgrade NetPassage15B and 15BR firmware
----------------------------------------------
Note: NetPassage 15B and 15BR run the same firmware.
The firmware upgrade procedure has the following assumptions:
o - your NP15 router has IP address 192.168.168.1
o - your PC has IP address 192.168.168.xxx where xxx is any number between 2 and 254
o - the PC is connected and working properly with the router.
If you have a different IP set for your router use that IP address instead.
a) Power ON NP15B and the PC.
b) From PC, startup the web browser, e.g. MS Internet Explorer 4.0 or higher
or Netscape 4.0x or higher.
c) Type the IP address of the router in the address box of the browser.
e.g. http://192.168.168.1
The router remote manager logon screen will appear.
d) Enter your password to logon. If you have not change the router's default password,
simply click on the Logon button to login to router configuration screen.
e) On the right-hand side box of router's configuration screen goto System Tools
section and click on the 'Upgrade Firmware' option.
f) Enter the drive, path and firmware name or click browse to search for the new
firmware file you have extracted in your local hard disk.
g) Click on the Upgrade button to start the upload.
h) When completed, it will prompt you to reboot. Click Yes to restart router.
It takes less than 15 seconds for router to be ready.
i) To check router is running the newer firmware, click the Logon button to reconnect
to router configuration page again. Then select 'About System' in the HELP section.
Firmware Version display should be new version and build number.
j) Congratulations ! You have successfully upgraded your router to the newer firmware.
------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.