How to enable SNTP and how it operates in NP15 series routers. 1) Click 'Set Router's Clock' option. 2) Check the 'Enable' radio button for Auto Time Setting and enter the SNTP server address. For multiple SNTP server address, seperate then with a semi-colon (;) Then click Apply button to save. 3) Click 'Reboot Router'. How it operates. ---------------- When enabled, it will automatically get its clock update from the SNTP server(s) defined at an interval of 1 hour provided the WAN port is up and running. If idle timeout is enabled and has timed out, it will not trigger a re-connection to the internet to get the current time. It will only continue to get update time when the internet connection is active again. ------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.