ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex RL100TX/10Base PCI Ethernet Adapter º
º (C) Copyright PDS, 1997. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
SUN PC-NFS V5.0 Installation
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
** Note:- The NDIS2 driver is in A:\NDIS2\RL100X.DOS
Please read all methods below and choose the one that matches your
configuration.
Method 1 -- NDIS Driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
When using PC-NFS concurrently with LAN Manager, select the "NDIS"
option from the PC-NFS installation screen. This option works with
the NDIS driver included in the provided driver diskette. Copy the
files listed below into the \NFS directory of your hard disk. These
files will be used in the installation.
File Description
------------ ----------------------------------------------
NFS-NDIS.SYS PC-NFS driver program
RL100X.DOS NDIS driver program
PROTMAN.SYS MS PROTOCOL MANAGER
NETBIND.EXE MS LAN MANAGER Netbind
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;
BUFFERS=10,0 C:\LANMAN\NETBIND
FILES=40 SET TEMP=C:\DOS
STACKS=0,0 SET NFSDRIVE=C
LASTDRIVE=G SET NFSPATH=C:\NFS
SHELL=C:\DOS\COMMAND.COM C:\DOS /P SET TN_DIR=C:\NFS\TELNET
DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\PRT *
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\NET INIT
DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
DEVICE=C:\LANMAN\NFS-NDIS.SYS
DEVICE=C:\LANMAN\RL100X.DOS
PROTOCOL.INI
ÄÄÄÄÄÄÄÄÄÄÄÄ
[PROTOCOL MANAGER]
DriverName = PROTMAN$
[RL100X_NIF]
DriverName = RL100X$
;; Usage: "Board=nn"
;; Range: 0-7. Default: 0
;------------------------
; Board = 0
;; Options: TX100, TX100FD, TX10, TX10FD, NWAY.
;; Usage: "MEDIA_TYPE=xxx" Default: NWAY
;----------------------------------------------
MEDIA_TYPE = NWAY
[NFS-NDIS]
DriverName = NFSLINK$
Bindings = RL100X_NIF
To use the NDIS driver, the user needs to obtain a PC-NFS 5.0
QUIKNDIS diskette which will install all but the Compex RL100TX
PCI NDIS driver.
Method 2 -- ODI Driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
"ODI" option from the PC-NFS installation screen. This option works
with the ODI driver included in the provided driver diskette. Copy
the files listed below into the \NFS directory of your hard disk.
These files will be used in the installation.
File Description
------------ -----------------------------------------
NFSODI.SYS PC-NFS driver program
RL100TX.COM ODI driver program
LSL.COM NetWare Link Support Layer
IPXODI.COM NetWare IPX/SPX Protocol
NETX.EXE NetWare Workstation Shell
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL
DEVICE=C:\NFS\PCNFS.SYS /l40 RL100TX
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT *
DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT
IPXODI
NETX
NET.CFG
ÄÄÄÄÄÄÄ
Link driver RL100TX
Frame Ethernet_802.3
Frame Ethernet_II
Protocol IPX 0 Ethernet_802.3
If your Novell FILE SERVER is configured to use the Ethernet_802.3
frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS
in your CONFIG.SYS file and add an entry in your NET.CFG file
defining the two frames types.
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. you are
welcomed at any time to browse through our BBS, and download any
drivers, utilities and help files.
If you still cannot get the Compex RL100TX PCI adapter working properly,
our technical experts are always ready to help.
Please gather the following information :
* The LAN adapter model
* Driver disk date code (Printer on the driver disk label)
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.