===================================================================
Compex Inc. SR02-2.2
NDIS 5.x Miniport Drivers Variant 1 Version: 7.82
These driver are for Win98, Win98 SE, WinME, Win2K and WinXP
===================================================================
This README.TXT covers information that was not yet known or
available when the user documentation shipped with this product
was written. It includes update information, additional
installation instructions, limitations to the current version of
the product, and suggestions to solve known issues or problems.
TABLE OF CONTENTS.
1. SOFTWARE DESCRIPTION
2. SYSTEM REQUIREMENTS
3. NEW IN THIS RELEASE
4. INSTALLATION NOTES
5. TECHNICAL CONSTRAINTS
6. KNOWN ISSUES
7. TECHNICAL SUPPORT
-------------------------------------------------------------------
1. SOFTWARE DESCRIPTION
1.1 About this software
This Driver supports the following network interface cards:
o- Compex iWavePort WL11A+
o- Compex iWavePort WL11B+
1.2 Files Installed
The following files will be installed in the Windows designated
directory:
NDIS 5.x Miniport drivers version 7.82
These files are for Win98, Win98 SE, WinME, Win2K and WinXP
WLAGSALL.INF
WNAGS.HLP
WNAGS.CNT
These files are for PCCARD WL11A+ and Win98, Win98 SE, WinME.
WLAGS48.SYS
WIAGS48.DLL
WAAGS48.DLL
WCAGS48.EXE
WNAGS48.CPL
WUAGS48.VXD
These files are for PCCARD WL11B+ and Win98, Win98 SE, WinME.
WLAGS48C.SYS
WIAGS48C.DLL
WAAGS48C.DLL
WCAGS48C.EXE
WNAGS48C.CPL
WUAGS48C.VXD
These files are for PCCARD WL11A+ and Win2K and WinXP.
WLAGS48B.SYS
WDAGS48B.DLL
WCAGS48B.EXE
WNAGS48B.CPL
WAAGS48B.DLL
WFAGS48B.SYS
These files are for PCCARD WL11B+ and Win2K and WinXP.
WLAGS48D.SYS
WDAGS48D.DLL
WCAGS48D.EXE
WNAGS48D.CPL
WAAGS48D.DLL
-------------------------------------------------------------------
2. SYSTEM REQUIREMENTS
2.1 Operating System
These Drivers are for the Microsoft Win98, Win98 SE, WinME,
Win2K and WinXP Operating Systems.
-------------------------------------------------------------------
3. NEW IN THIS RELEASE
3.1 Version 7.82 SR02-2.2
WL11B+
* This was the first release for WL11B+.
WL11A+
* Improved firmware version 8.72 for station and AP is
embedded in the driver.
3.2 Version 7.62 SR02-1
* Introduction of driver variants
Variant 2 has been defined for two purposes:
1. to identify NDIS 5.1 drivers (NDIS 5.0 has variant 1)
Note that NDIS 5.0 and NDIS 5.1 are covered by NDIS 5
2. to identify NT4 Softex drivers (NT4 has variant 1)
Variant 2 drivers have a 'B' appended to the filenames
listed above.
Future variant 3 will have a 'C' appended.
Variant 1 has no 'A' appended.
* For each OS a multi-brand INF file is generated.
As the name suggests, a multi-brand INF file contains
the card characteristics of various brands.
Multi-brand must not be confused with Combined, the latter
representing the card characteristics on various OS’es
for one brand.
* Various inconveniences w.r.t. Japanese help files
and screen texts have been resolved
* Stability issues have been resolved for
the Control Panel Applet
* Firmware 8.42 is used in the driver.
- Initial value for CurrentTXRate is 11 Mbps i.s.o. 2 Mbps.
- Led behaviour has been modified:
Power led off: radio disabled
Power led continuously on: radio enabled
Power led flickers every 100 ms: radio enabled and
power management ON
Activity led off radio disabled
Activity led flickers once per 10s: radio enabled
but no network found
Activity led flickers every 100 ms: radio enabled and
Rx/Tx activity
3.3 Version 7.42 Winter 2002
* Added support for
- 802.1x authentication
- Ultra high density
- Promiscuous mode
* Extended functionality of Control Panel Applet
The Control Panel Applet has been extended such that it
supports multiple cards to be configured in a single
system.
3.4 Version 7.08 Fall 2001
* Correct problem: Control Panel Applet does not accept
hexadecimal coded encryption keys.
3.5 Version 7.06 Summer 2001
* Added Firmware as part of the driver.
* Changed ControlPanel to Wizard style
* Added Enhanged PowerManagement
3.6 Version 6.28 Winter 2001
* Added functionality for enabling/disabling radio from the
Client Manager
* Putting 'ANY' in a peer-to-peer profile gives a apropriate
warning.
* Profiles can now be selected trough the keyboard.
-------------------------------------------------------------------
4. INSTALLATION NOTES
4.1 Standard Installation
Please refer to the 'Getting Started Guide' or 'User's
Guide' that came with your product.
-------------------------------------------------------------------
5. TECHNICAL CONSTRAINTS
None.
-------------------------------------------------------------------
6. KNOWN ISSUES
None.
-------------------------------------------------------------------
7. TECHNICAL SUPPORT
WEB site: www.cpx.com
www.compex.com.sg
Support email: support@cpx.com
support@compex.com.sg
===================================================================
END OF FILE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.