ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex LinkPort\TX16A 10/100 PCMCIA Fast Ethernet º
º CopyRight(c) 2000 Compex Inc. º
º All rights reserved º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Installation for Microsoft Windows 95
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This file contain the following information:
A) Installation procedure to install LinkPort\TX16A adapter for Microsoft
Windows 95 Released B (or OSR2) version and First Release version OS
B) Uninstall LinkPort\TX16A driver from Windows 95. Run this when you are
updating to a newer drivers.
Windows 95 provides a complete "Plug n' Play" System that will
automatically recognize and configure most PC Cards.
Before inserting your Compex LinkPort/TX16A PCMCIA Card, the system's
PCMCIA chipset must be enabled and functioning. The PCMCIA chipset is
responsible for controlling the systems interface for PC Cards.
Please consult the system's manual or manufacture for use with Windows
95.
Please resolve all system conflicts, errors, and Windows 95 issues
before installing the Compex LinkPort/TX16A PCMCIA card.
Please have the installation media for the Windows 95 ready for
any request for files.
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
With the system off, remove all PC Cards
Windows 95 Setup
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
There are currently two versions of Windows 95:
- the original release (version A)
- a later release (also known as OSR2, or version B)
The installation procedure for the network driver will
vary slightly depending on the version of Windows 95
that you are using.
Windows 95 Version B (or OSR2) Setup
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
(1) Start up your computer. After Windows 95 is up and running,
put the driver disk of PCMCIA Fast Ethernet into drive A:.
(2) Insert PCMCIA Fast Ethernet Card into PCMCIA slot.
(3) When the Device Driver Wizard window appears, click
the "Next" button. Windows 95 will automatically check the
disk that is in the floppy drive for the PCMCIA Fast Ethernet
Card network drivers.
(4) When the Fast Ethernet PC Card message appears,
click "Finish" button. Windows 95 will begin copying files.
(5) You may be asked to supply your original Windows 95 CD-ROM.
(6) Type in the path name A:\ and click OK.
(7) Complete the Window 95 PCMCIA installation procedures and go to
Control Panel and select the "network" icon.
(8) Add the Client, Protocol or Services you needed.
(9) Restart the Windows 95 system.
Windows 95 Version A Setup
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
(1) Start up your computer. After Windows 95 is up and running,
put LinkPort/TX16A driver disk into drive A:
(2) Insert PCMCIA Fast Ethernet Card into PCMCIA slot.
(3) In Windows 95 "New Hardware Found" dialog box,
select "Driver from disk prodived by hardware manufacturer".
(4) Type in the path name A:\WIN95 and click OK.
(5) Complete the Window 95 PCMCIA installation procedures and go to
Control Panel and select the "network" icon.
(6) Add the Client, Protocol or Services you needed.
(7) Restart the Windows 95 system.
B) Uninstall LinkPort\TX16A Windows 95 driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
After the first successfully installation for LinkPort\TX16A adapter,
and for any reason you removed the network adapter entry in Network applet
in Control Panel, and do a reinstallation of the adapter, you do not need
to insert the driver disk again. Windows will be automatically detected the
adapter and install the driver after the first installation.
For this reason if there is a update driver, you have to uninstall the
adapter driver from Windows first before new driver can be installed.
To uninstall the adapter driver files do the following,
1) First run UN95T16A.bat to remove the driver.
i) From Windows goto DOS prompt and run UN95T16A.bat from the disk
\WIN95 directory or copy to local harddisk C:\ and run it.
e.g., A:\UN95T16A
or C:\UN95T16A
ii) To proceed to remove the drivers, press any key to continue.
If you changed you mind, press CTRL-C to abort.
2) Then goto Control Panel | Network applet| to remove the adapter from
the network list.
3) Answer YES to restart Windows.
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. you are
welcomed at any time to browse through our BBS, and download any
drivers, utilities and help files.
If you still cannot get the Compex LinkPort/TX16A working properly,
our technical experts are always ready to help. Please be at your
computer, have your Compex LinkPort/TX16A PCMCIA card, Drivers Disk,
and the following information available:
* Version number of any drivers you are running
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT
are rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are
rights reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.