WINME.TXT Driver File Contents (wa0107d1.zip)

       ________________________________________________________________
       |                                                              |
       |        Compex iWavePort 11Mbps Wireless LAN Adapter          |
       |        (C) Copyright PDS, 2001. All Rights Reserved.         |
       |                                                              |
       |______________________________________________________________|


  ============
  INTRODUCTION 
  ============

The installation Compex iWavePort\WL11A driver for Windows Me is menu driven
through the Windows Me interface. The directory structure provided on the
driver diskette has been setup for automatic installation. The file
"NETCW10.INF" is the setup file in the root directory used by Windows Me.
Follow the guidelines in the Microsoft Windows Me manuals for more details.


How to install Compex iWavePort/WL11A 11Mbit Wireless LAN Adapter
for Microsoft Windows Millennium Edition (Me)
=============================================
 INSTALLATION PROCEDURE:

  Most system comes with pre-installed Windows Me. This installation steps
  assumed your PC has Windows Me pre-installed.

   *NOTE: During the installation process, some files might need from
         Windows ME CDROM. Please have it loaded in the CDROM drive 
         during this install.

  1) If your notebook is started up. Insert WL11A card in a free PCMCIA or CardBus slot. 
     If you install into a desktop, first plug WL11A card into the PCI Converter.
     Then install it in a free PCI slot in desktop before power ON.  
  
  2. Startup Windows Me. It will automatically detect the Compex iWavePort\WL11A
     network adapter.
  3. Insert the Compex iWavePort\WL11A driver disk in drive A.
  4. The Add New Hareware Wizard screen display the following:

         What would you like to do ?
         _/ - Automatic search for a better driver (Recommended)
         o - Specific the location on the drive (Advanced)

      Recommended to use the first option. To continue click Next button.
                        
  5. Windows then let you mark on one or more of the following

        _/ - Floppy Disk Drive
         o - CR-ROM
         o - Specifiy a location

        Check only on "Floppy Disk Drive" option and click NEXT,

    * Hint:- If you have not inserted the driver disk after you click NEXT,
             insert the WL11A driver disk and click BACK button to back
             step once then click NEXT button again to read the disk.

  6. Windows will display the following;

	       "Compex iWavePort\WL11A 11Mbps Wireless LAN Adapter"

	For PCI card, it will display,
    
		"Compex RE11WL-PCI Wireless LAN PCI Adapter"     

        Click NEXT, to start copy the driver.

  7. Windows will contiune to copy all related files from Windows 98
     CDROM. When completed it will prompt to Restart the machine.
     At this point you may want to add and/or change to other network
     protocols, Windows clients, and other services.
     Then click "NO" and Windows will start up to the Active desktop.
     Click on the Network applet in Control Panel to add/or make the
     changes. Refer to Windows manual for more details.

     Click YES if you do not intend to add additional services, clients
     and protocols.
     By default, Windows 98 install only the following;

          o-   Client for Microsoft Network
          o-   Compex iWavePort\WL11A Wireless LAN Adapter
          o-   TCPIP

     For PC, it display the following devices,

          o-   Client for Microsoft Network
          o-   Compex RE11WL-PCI Wireless LAN PCI Adapter
          o-   TCPIP
	
     If your machine will share it resources, add Files and Printing
     share services.
     Refer to Windows help for details on adding these.

  8. When completed, Windows will again prompt to restart the machine.
     Click YES.

  9. When Windows restarted, Compex iWavePort\WL11A wireless adapater is ready
     to access the network.
                
 Procees to install the wireless utility. To install run SETUP.EXE from disk 1
  The utility will look for more files in disk 2. Insert it when prompted.
  Recommended to let the utility install with its default setup.   
  Click Next or OK when promot to complete the installation. 
  Click Restart Windows when prompt.

  For more details on how to configure WL11A using this utility, refer to the 
  User's guide.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.94