1. wl11xp2.zip Driver
2. WINNT.TXT File Contents

WINNT.TXT Driver File Contents (wl11xp2.zip)

         ________________________________________________________________
         |                                                              |
         |         Compex WavePort 11Mbps Wireless LAN Adapter          |
         |        (C) Copyright PDS, 2001. All Rights Reserved.         |
         |                                                              |
         |______________________________________________________________|

                     Windows NT Installation Guide
                     =============================     

     Before inserting your Compex WavePort\WL11 PCMCIA card,
     the system's PCMCIA chipset must be enabled and functioning.
     The PCMCIA chipset is responsible for controlling the systems interface
     for PC Cards. If you have a newer PCMCIA controller on your notebook
     please contact your supplier for an update PCMCIA driver for Windows NT
     v4.0 before you install WL11 adapter.

     Please consult the system's manual or manufacturer for use with Windows NT.

     Windows NT is not a plug and play OS thus certain notebooks' PCMCIA
     controller may not initialize properly with WL11 card.
     For such notebooks additional card and socket software is needed to
     properly install the WL11 card. This software is widely available in
     computer shops. Examples of such software are CardWare for NT and
     Systemsoft for NT.

     Please resolve all system conflicts, errors, and Windows NT issues
     before installing the Compex WavePort\WL11 PCMCIA card.


Windows NT v4.0 Installation
----------------------------
The procedure assumed Windows NT v4.0 is already installed to your
notebook.

  *NOTE: During the installation process, some files might need from
         Windows NT4.0 CDROM. Please have it loaded in the CDROM drive 
         during this install.


 1) Power OFF the machine and insert Compex WavePort\WL11 PCMCIA adapter
    into one of the PCMCIA slots in your notebook.
 2) Power ON and startup Windows NT.
 3) Click on My Computer | Control Panel | Network
 4) Click on ADAPTER tab on top.
 5) Click on ADD button.
 6) A list of adapters appear. Do not select from the list.
    Instead, click on Have Disk option below.
 7) Insert WL11 driver disk in drive A
 8) When prompt for the driver, enter A:\
    Click OK
 9) The WL11 card properties page appears.
    The default setting are:

        I/O Base address: 0x300
        Interrupt       : 5
        Connection Type : Autosense

    Make the necessary changes if any of the setting conflicts with
    another device. The table of the supported list is shown below.

    Click OK to accept the settings.

11) If may have to assign a machine and workgroup name if you have not
    done so. Click on Identification tab on top.
12) You may also want to add additional protocols and services from the
    Protocol and Services tabs.
    By default, TCPIP protocol is automatically added.
13) Click OK below when finished. Windows NT will complete the rest of the
    installation.
14) Restart Windows NT and WL11 card is now ready to service the network.

 Refer to Windows NT manual for more details on how to add others services and
 protocols support.

 Procees to install the wireless utility. To install run SETUP.EXE from disk 1
  The utility will look for more files in disk 2. Insert it when prompted.
  Recommended to let the utility install with its default setup.   
  Click Next or OK when promot to complete the installation. 
  Click Restart Windows when prompt.

  For more details on how to configure WL11 using this utility, refer to the 
  User's guide.
              

      Resource Recommendations
      ------------------------
          ____________________________________________________________________
          |	       |						     |
          | I/O Base   |  300 normally safe,                                 | 
          |            |  Others available values: 200, 220, 240, 280, 300,  |
          |            |                           320, 340, 360, 380        |
          |____________|_____________________________________________________|
          | Interrupt  |  5 normally safe, if laptop is multimedia           |
          | (IRQ)      |  equipt, please try a higher interrupt              |
          |            |  Other available values: 3,4,5,9,10,11,12,15        |
          |____________|_____________________________________________________|
          | Socket     |  Most common problem, check with your manual        |
          |            |  to find which socket is 0 (slot A) or 1 (slot B).  |
          |____________|_____________________________________________________|                      

  Support Options
  ---------------

       Should you have problem to install WL11 card or get it working,
       call our technical experts are always ready to help.
       Please be at your computer, have your WL11 card, Drivers Disk,
       and the following information available:

       * Version number of any drivers you are running
       * The extact text of any error message displayed on your screen.
       * The type of notebook and PCMCIA/CardBus controller use.
       * The type of network.