Driver Installation Guide for Windows NT 4.0
==================================================
Introduction
============
This document describes the procedure to install NDIS 4.0 driver on
Windows NT 4.0 for Compex FreedomLine 1000Base-T PCI Adapter.
Location of Driver: \WINNT40\DP83820.SYS
Installation Procedure
======================
Before starting with the installation process, make sure that the LAN
adapter is properly installed and configured.
1. Open "Control Panel"->"Networks" and then choose the "Add Adapter"
button. The "Add Noetwork Adapter" dialog box will appear.
2. Insert the NIC driver diskette into your floppy drive, and select
"have disk" then specify the path of the driver (i.e. A:\WINNT40).
3. Select "Compex FreedomLine 1000Base-T PCI Adapter", and start to
copy the driver files to your system.
4. After all the driver files have been copied to your system, then a
property dialog box will appear in the screen. You can enable the
special properties if you want to.
5. When the driver installation is completed, restart your system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.