1. en1657-a.zip Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (en1657-a.zip)

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    PCMCIA
    "Jazz-Internal Bus"
[Options]
    ACCNT
;    ACCNTSOCKETEA
[FileConstants]
UtilityInf	= "UTILITY.INF"
ParamInf	= "NCPARAM.INF"
subroutineinf	= "SUBROUTN.INF"
SoftwareType	= "driver"
Exit_Code	= 0
NetEventDLL	= "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL	= "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer	= "Microsoft"
ProductMajorVersion	= "3"
ProductMinorVersion	= "51"
ProductVersion	= $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName	= "ACCNT"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\accnt.sys"
NetRuleSoftwareType	= "accntSys ndisDriver accntDriver"
NetRuleSoftwareUse	= $(SoftwareType)
NetRuleSoftwareBindForm = """accntSys"" yes no container"
NetRuleSoftwareClass	= {"accntDriver basic"}
NetRuleSoftwareBindable = {"accntDriver accntAdapter non exclusive 100"}
ProductHardwareName	= "ACCNT"
NetRuleHardwareType	= "accnt accntAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass	= {"accntAdapter basic"}
ProductKeyName	= $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName	= $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from	  = ""
to	  = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull 	= ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct	= ""
KeyParameters	= ""
TRUE		= 1
FALSE		= 0
NoTitle 	   = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath	= $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status	   = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media	   = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status	      = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status	       = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
;   set !G:DebugOutputControl = 1
    set Option	 = $($1)
    set SrcDir	 = $($2)
    set AddCopy  = $($3)
    set DoCopy	 = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Debug-Output "ACCNT OEMSETUP Installation Start !!! "
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
		set StartLabel = removeadapter
	else-Ifstr(i) $(!NTN_InstallMode) == Update
			set StartLabel = UpgradeSoftware
	else-Ifstr(i) $(!NTN_InstallMode) == bind
		set StartLabel = bindingadapter
	else-Ifstr(i) $(!NTN_InstallMode) == configure
		set CommonStatus = STATUS_REBOOT
		set ActivateDetection = TRUE
		set StartLabel = configureadapter
		Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
			Debug-Output "Cannot configure the Novell 2000 driver software."
			Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif
			set Error = $($R0)
			set from = end
			set to = end
			goto nonfatalinfo
		endif
    else
		set StartLabel = installadapter
		set OEM_ABANDON_OPTIONS = {}
		set OEM_ABANDON_SOFTWARE = FALSE
		set OEM_ABANDON_ON = TRUE
		set ActivateDetection = TRUE
    endif
    Debug-Output "OEMNADN2.INF: =================================================="
    Debug-Output "OEMNADN2.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "OEMNADN2.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "OEMNADN2.INF: Option is: "$(Option)
    Debug-Output "OEMNADN2.INF: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "OEMNADN2.INF: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "OEMNADN2.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "OEMNADN2.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "OEMNADN2.INF: =================================================="
    Set DetectedCard = FALSE
    set PCMCIA = 0
    set CardType = 0
    Ifstr(i) $(ActivateDetection) != TRUE
	Goto skipdetection
    Endif
;    Set TypeList = {{IRQ,IRQList,IRQValue},+
;		     {PCMCIA, PCMCIAList, PCMCIA},+
;		     {IOADDR, IOBaseAddrDecList, IOBaseAddrValue}}
;    Debug-Output "OEMNADN2.INF: Calling Param_BuildTypeLists"
;    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
;    Set Status = $($R0)
;    ifstr(i) $(Status) != STATUS_SUCCESSFUL
;	 Goto fataldetect
;    Endif
;    Debug-Output "OEMNADN2.INF: Calling Param_SetDefaults"
;    Shell $(ParamInf) Param_SetDefaults {}
;    Shell $(ParamInf) HexListFromDecList $(IOBaseAddrDecList)
;    Set IOBaseAddrHexList = $($R0)
;;   Set IOBaseAddrHexList = {0x300,0x320,0x340,0x360,0x380,0x3A0,0x3C0,0x3E0,0x200,0x220,0x240,0x260,0x280,0x2A0,0x2C0,0x2E0}
;    Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
;    Set IRQList = $($R0)
;;   Set IRQList = {3,4,5,9,10,11,12,15}
;    Ifstr(i) $(!STF_NCDETECT) == YES
;	 Ifstr(i) $(!STF_NCOPTION) == $(Option)
;	    Set DetectedCard = TRUE
;	    Debug-Output "OEMNADN2.INF: Setting DetectedCard to TRUE"
;	 Endif
;    Endif

   Set TypeList = {{IRQ,IRQList,IRQValue},+
		   {IOADDR, IOBaseAddrDecList, IOBaseAddrValue}}
   Set IRQList = {3,4,5,9,10,11,12,15}
   Set IOBaseAddrDecList = {768,800,832,864,896,928,968,992,512,544,576,608,640,672,704,736}
   Set IOBaseAddrHexList = {0x300,0x320,0x340,0x360,0x380,0x3A0,0x3C0,0x3E0,0x200,0x220,0x240,0x260,0x280,0x2A0,0x2C0,0x2E0}
   Set !STF_NC_PARAMS = {{IRQ, 1, 80, { 3, 4, 5, 9, 10, 11, 12, 15}},+
			 {IOADDR, 1, 100, {768,800,832,864,896,928,968,992,512,544,576,608,640,672,704,736}}}
   Set !STF_NC_PNAMES = {{IRQ, IRQValue, 3}, {IOADDR, IOBaseAddrValue, 768}}
   Shell $(ParamInf) Param_SetDefaults {}
   Set (!STF_NCOPTION) = $(Option)
   Ifstr(i) $(!STF_NCDETECT) == YES
       Ifstr(i) $(!STF_NCOPTION) == $(Option)
	  Set DetectedCard = TRUE
	  Debug-Output "OEMNADN2.INF: Setting DetectedCard to TRUE"
       Endif
   Endif
   Debug-Output "Install #1"
skipdetection =+
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
   Debug-Output "Install #2"
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftware$(Option)Title),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif
   Debug-Output "Install #3"
    Ifstr(i) $(DetectedCard) != TRUE
	Goto adaptersetup
    Endif
    StartWait
    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
	Goto adaptersetup
    Endif
   Debug-Output "Install #4"
    Set DetectedParams = $($R1)
    Debug-Output "OEMNADN2.INF: Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
    goto adapteroptions
configureadapter = +
   Debug-Output "Install #5"
    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Debug-Output "Cannot find component product key"
	    goto fatalregistry
	Endif
    Endif
   Debug-Output "Install #6"
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "INF: FindService shell failure"
	Goto ShellCodeError
    Endif
   Debug-Output "Install #7"
    Ifstr(i) $($R0) != NO_ERROR
	Debug-Output "INF: FindService Shell error: "$($R0)
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	Debug-Output "Cannot find component service"
	goto fatalregistry
    endif
   Debug-Output "Install #8"
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
   Debug-Output "Install #9"
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	Ifstr(i) $(ValueName) == "InterruptNumber"
	    set IRQValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "IoBaseAddress"
	    set IOBaseAddrValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "BusType"
	    set BusInterfaceType = $(ValueData)
	else-ifstr(i) $(ValueName) == "PCMCIA"
	    set PCMCIA = $(ValueData)
	else-ifstr(i) $(ValueName) == "BusNumber"
	    set BusNumber = $(ValueData)
	endif
    EndForListDo
    ifstr(i) $(IRQValue) == ""
	set IRQValue = *($(IRQList), 2)
    endif
    ifstr(i) $(IOBaseAddrValue) == ""
	set IOBaseAddrValue = *($(IOBaseAddrDecList), 1)
    endif
   Debug-Output "Install #10"
adaptersetup =+
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
	Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration"
	Goto adapteroptions
    Endif
    Ifstr(i) $(DetectedCard) == TRUE
	Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
	    Goto adapterverify
	Endif
    Endif
    goto adapteroptions
adapteroptions = +
   Debug-Output "Install #11"
    set from = adapteroptions
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
	ifstr(i) $(!AutoNetInterfaceType) != ""
	    set BusInterfaceType = $(!AutoNetInterfaceType)
	else
	    set BusInterfaceType = 1
	endif
	ifstr(i) $(!AutoNetBusNumber) != ""
	    set BusNumber = $(!AutoNetBusNumber)
	else
	    set BusNumber = 0
	endif
	goto adapterverify
    endif
   Debug-Output "Install #12"
    set IOBaseAddress = *($(IOBaseAddrHexList), ~($(IOBaseAddrDecList),+
	$(IOBaseAddrValue)))
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
		set IRQValue = $(Combo1Out)
		set IOBaseAddress = $(Combo2Out)
		ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
		set CommonStatus = STATUS_USERCANCEL
		Debug-Output "Action: exit. Bye."
		ui pop 1
		goto end
    else
		ui pop 1
		Debug-Output "Action: unknown. Bye."
		goto end
    endif
   Debug-Output "Install #13"
    set IOBaseAddrValue = *($(IOBaseAddrDecList), ~($(IOBaseAddrHexList),+
	$(IOBaseAddress)))
    ifstr(i) $(!STF_NCDETINFO) == {}
	ifint $(PCMCIA) != 1
	    Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
	    endif
	    set BusInterfaceType = $($R1)
	    set BusNumber = $($R2)
	else
	    set BusInterfaceType = 1
	    set BusNumber = 0
	endif
    else
	set BusInterfaceType = *($(!STF_NCDETINFO),5)
	set BusNumber = *($(!STF_NCDETINFO),6)
    endif
adapterverify =+
   Debug-Output "Install #14"
    Ifstr(i) $(DetectedCard) != TRUE
	Goto skipoptions
    Endif
    Debug-Output "OEMNADN2.INF: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
	Debug-Output "OEMNADN2.INF: Param_VerifyCard succeeded"
	Goto skipoptions
    Endif
    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
skipoptions =+
   Debug-Output "Install #15"
    ifint $(OldVersionExisted) == $(TRUE)
	ifstr(i) $(!NTN_InstallMode) == configure
		goto writeparameters
	endif
    endif
    StartWait
;  set $(SrcDir)= "A:\NT35"
;  Debug-Output "STF_CWDDIR =" $(!STF_CWDDIR)
;  Debug-Output "SrcDir =" $(SrcDir)
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
		Ifstr(i) $(DoCopy) == "YES"
		    Shell $(UtilityInf),DoAskSource,$(!STF_CWDDIR),$(SrcDir) YES
		     Ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError
		    Else-Ifstr(i) $($R0) == STATUS_FAILED
			Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			   goto ShellCodeError
			endif
			set Error = $($R0)
			Goto fatal
		    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			Goto successful
		    Endif
		    Set SrcDir = $($R1)
		Endif
		install "Install-Option"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    goto fatal
		endif
	endif
   Debug-Output "Install #16"
       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), +
			$(ProductSoftwareName), +
			$(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), +
			$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
			$(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error"
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct	   = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add software components"
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
   Debug-Output "Install #17"
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
		   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
		   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
		   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+
		   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+
		   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
		   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add value list."
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Resgitry error: add value list."
	goto fatalregistry
       endif
    endif
   Debug-Output "Install #18"
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "Cannot add hardware component"
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Registry error: add hardware component"
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
		       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
		       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
		       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error"
		goto ShellCodeError
    endif
   Debug-Output "Install #19"
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Resgitry error: add value list."
		CloseRegKey $(KeyParameters)
		CloseRegKey $(KeyAdapterRules)
		goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto writeparameters
   Debug-Output "Install #20"
writeparameters = +
    ifint $(BusInterfaceType) == 8
	set PCMCIA = 1
	set BusInterfaceType = 1
    endif
    set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
		       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
		       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
		       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
		       {CardType,$(NoTitle),$(!REG_VT_DWORD),0},+
		       {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $(PCMCIA) == 1
	set NewValueList = {{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
	Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    else
	DeleteRegValue $(KeyParameters) "Pcmcia"
    endif
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
	Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
   Debug-Output "Install #21"
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "Registry error: Add value list"
		goto fatalregistry
    endif
    EndWait
    goto successful
bindingadapter =+
   Debug-Output "Binding"
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
   Debug-Output "Remove"
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
				$(ProductSoftwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    else
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), $(!NTN_RegBase)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    endif
    goto end
UpgradeSoftware = +
   Debug-Output "Update"
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	install "Install-Update"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	    goto fatal
	endif
	SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	CloseRegKey $(KeyProduct)
    else
	goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
   Debug-Output "Install #22"
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
   Debug-Output "Install #23"
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
   Debug-Output "Install #24"
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
   Debug-Output "Install #25"
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
   Debug-Output "Install #26"
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
;  Debug-Output "Install #27"
   set STF_VITAL	= ""
   set STF_OVERWRITE	= "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Source Media Descriptions]
;  Debug-Output "Install #28"
    1  = "Accton EN1657-X Driver Disk" , TAGFILE = nt35\accnt.sys
;     1 = "Windows NT Workstation CD-ROM or Setup Disk #4" , TAGFILE = disk1.w
;     2 = "Windows NT Workstation CD-ROM or Setup Disk #5" , TAGFILE = disk2.w
;     3 = "Windows NT Workstation CD-ROM or Setup Disk #6" , TAGFILE = disk3.w
;     4 = "Windows NT Workstation CD-ROM or Setup Disk #7" , TAGFILE = disk4.w
;     5 = "Windows NT Workstation CD-ROM or Setup Disk #8" , TAGFILE = disk5.w
;     6 = "Windows NT Workstation CD-ROM or Setup Disk #9" , TAGFILE = disk6.w
;     7 = "Windows NT Workstation CD-ROM or Setup Disk #10", TAGFILE = disk7.w
;     8 = "Windows NT Workstation CD-ROM or Setup Disk #11", TAGFILE = disk8.w
;     9 = "Windows NT Workstation CD-ROM or Setup Disk #12", TAGFILE = disk9.w
;    10 = "Windows NT Workstation CD-ROM or Setup Disk #13", TAGFILE = disk10.w
;    11 = "Windows NT Workstation CD-ROM or Setup Disk #14", TAGFILE = disk11.w
;    12 = "Windows NT Workstation CD-ROM or Setup Disk #15", TAGFILE = disk12.w
;    13 = "Windows NT Workstation CD-ROM or Setup Disk #16", TAGFILE = disk13.w
;    14 = "Windows NT Workstation CD-ROM or Setup Disk #17", TAGFILE = disk14.w
;    15 = "Windows NT Workstation CD-ROM or Setup Disk #18", TAGFILE = disk15.w
;    16 = "Windows NT Workstation CD-ROM or Setup Disk #19", TAGFILE = disk16.w
;    17 = "Windows NT Workstation CD-ROM or Setup Disk #20", TAGFILE = disk17.w
;    18 = "Windows NT Workstation CD-ROM or Setup Disk #21", TAGFILE = disk18.w
;    19 = "Windows NT Workstation CD-ROM or Setup Disk #22", TAGFILE = disk19.w
;    20 = "Windows NT Workstation CD-ROM or Setup Disk #23", TAGFILE = disk20.w
;    21 = "Windows NT Workstation CD-ROM or Setup Disk #24", TAGFILE = disk21.w
;    22 = "Windows NT Workstation CD-ROM or Setup Disk #25", TAGFILE = disk22.w
;    23 = "Windows NT Workstation CD-ROM or Setup Disk #26", TAGFILE = disk23.w
;    24 = "Windows NT Workstation CD-ROM or Setup Disk #27", TAGFILE = disk24.w
;    25 = "Windows NT Workstation CD-ROM or Setup Disk #28", TAGFILE = disk25.w
;    26 = "Windows NT Workstation CD-ROM or Setup Disk #29", TAGFILE = disk26.w
;    27 = "Windows NT Workstation CD-ROM or Setup Disk #30", TAGFILE = disk27.w
;    28 = "Windows NT Workstation CD-ROM or Setup Disk #31", TAGFILE = disk28.w
;    29 = "Windows NT Workstation CD-ROM or Setup Disk #32", TAGFILE = disk29.w
;    30 = "Windows NT Workstation CD-ROM or Setup Disk #33", TAGFILE = disk30.w
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
;[Files-Inf]
;2,	 oemsetup.inf,	  SIZE=1000,	 RENAME=$(!UG_Filename)
;[Files-ACCNT]
;19,ACCNT.SYS , SIZE=19456
;[Files-ACCNTPCMCIA]
;19,ACCNT.SYS , SIZE=19456
;[Files-ACCNTSOCKETEA]
;19,ACCNT.SYS , SIZE=19456

[Files-Inf]
1,	oemsetup.inf,	 SIZE=32000,	 RENAME=$(!UG_Filename)
[Files-ACCNT]
1,ACCNT.SYS , SIZE=32000
[Files-ACCNTPCMCIA]
1,ACCNT.SYS , SIZE=32000
[Files-ACCNTSOCKETEA]
1,ACCNT.SYS , SIZE=32000

[LanguagesSupported]
    ENG
[OptionsTextENG]
    ACCNT		= "Accton EN1657-X Ethernet Adapter"
;   ACCNTSOCKETEA	= "Accton EN1657-X Ethernet Adapter"
[FileConstantsENG]
;  Debug-Output "Install #29"
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle	= "Accton EN1657-X Adapter Setup"
ProductSoftwareACCNTDescription      = "Accton EN1657-X Ethernet Adapter Driver"
ProductSoftwareACCNTSOCKETEADescription      = "Accton EN1657-X Ethernet Adapter Driver"
ProductHardwareACCNTDescription        = "Accton EN1657-X Ethernet Adapter"
ProductHardwareACCNTSOCKETEADescription        = "Accton EN1657-X Ethernet Adapter"
ProductSoftwareACCNTTitle    = "Accton EN1657-X Ethernet Adapter Driver"
ProductSoftwareACCNTSOCKETEATitle    = "Accton EN1657-X Ethernet Adapter Driver"
ProductHardwareACCNTTitle      = "Accton EN1657-X Ethernet Adapter"
ProductHardwareACCNTSOCKETEATitle      = "Accton EN1657-X Ethernet Adapter" ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText	= "Shell Code Error."
[DialogConstantsENG]
Help	    = "&Help"
Exit	    = "Cancel"
OK	    = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel	    = "Cancel"
[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
;DlgTemplate = "ACCNT"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)
Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrHexList)
Combo2Out  = $(IOBaseAddress)
ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADN2_INS)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: ftp, load: 1.61