NT.TXT Driver File Contents (en1657-a.zip)

		    Accton Technology Corporation
	     Ethernet Family LAN adapter board drivers


The driver contained in the directory NT31 is Microsoft Windows NT 3.1
driver. The drivers named ACC2000 conform to the Network Driver Interface
Specification (NDIS) 3.0.

There are two files in this directory, one is the driver ACC2000.SYS and
the other is installation information file OEMSETUP.INF.

ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Installing driver on Microsoft Windows NT
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

   1)  In the Main group of NT, choose the Control Panel icon.

   2)  In the Control Panel window, choose the Network icon.

   3)  In the Network Settings dialog box, choose the Add Adapter button.
       The Add Network Adapter dialog box appears.

   4)  In the list of network cards, select "<other> Requires disk from
       manufacturer", and then press <Enter> button.

   5)  Insert this driver disk in drive A, enter drive and pathname A:\WINNT
       and then choose the OK button.

   6)  In the Select OEM Option dialog box, you will see Accton NE-Series
       Adapter in the menu, use OK button to install it.

   7)  And then Accton NE-Series Network Card Setup dialog box appear, you
       must specify "IRQ level" and "I/O Port Address" of the adapter plugged
       in your PC. Because netcard detection function does not support
       in SETUP program, please make sure these setting matching your adapter's
       configurations. Otherwise the network ability of Windows NT can not
       work properly.

   8)  After that, installation is completed. Accton's adapter becomes one
       of those Installed Adapter Cards and driver become one of those
       Installed Network Software. You can see: "[0x]Accton NE-Series Adapter"
       within Installed Adapter Cards menu and "Accton NE-Series Adapter
       Driver" within Installed Network Software menu.


   9)  Now, the SETUP program have already copied ACC2000.SYS from A:\WINNT
       directory to C:\WINNT\SYSTEM32\DRIVERS and the OEMSETUP.INF form
       A:\WINNT to C:\WINNT\SYSTEM32 but renamed it to other installation
       information file. So next time, if you want to add Accton's adapters
       to your system, you do not need floppy diskette again.

  10)  To complete network installation, remember binding the adapter to
       transport drivers by choosing "Bindings" button under Network Setting
       dialog box.

  11)  Restarting your system you will acquire network service.


Trademarks:
Microsoft Windows NT is a trademark of Microsoft Corporation.



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.54