Accton Ethernet Adapter
Power Lan driver Installation
=============================
To install Accton's EN165x adapter with Power Lan system, user
can use 3 differents method as following:
A) Install Power Lan driver with Accton's EN165x adapter
B) Install Accton's DOS/ODI drivers for Power Lan
C) Install Accton's Packet drivers for Power Lan
A) Install Power Lan Driver with Accton's EN165x adapter
=====================================================
To install Power Lan driver with Accton's EN165x adapter
1.) Use Power Lan install program, and select "NE2000" item.
2.) Change Iobase and IRQ setting by Accton's 1Step setup program
and using the same port at NXNE2000 command line parameter:
/lp:Iobase /li:IRQ
Example ----- PLSTART.BAT
if %PLTREE%. == . set PLTREE=C:\PL
REM
REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
REM
%PLTREE%\PROGRAMS\nxne2000 /ln:0 /ses:14 /nam:17 /lp:300 /li:3
REM
B) Install Accton's DOS/ODI driver for Power Lan
=============================================
To install Accton DOS/ODI driver at Power Lan system:
1.) Copy Accton's DOS/ODI driver "MPX2ODI.COM from A:\NETWARE\ODI\DOSODI
to C:\PL\PROGRAMS
2.) Copy Novell's driver "LSL.COM from A:\NETWARE to C:\PL\PROGRAMS
3.) Create NET.CFG file as following example at C:\PL\PROGRAMS
4.) Use Power Lan install program, and select "ODI" item,
then add "LSL.COM" and "MPX2ODI.COM" before NXODI.EXE
at C:\PL\ADMIN\SYS\PLSTART.BAT's "start NETBIOS" section
Example ----- PLSTART.BAT
if %PLTREE%. == . set PLTREE=C:\PL
REM
REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
REM
LSL
%PLTREE%\MPX2ODI ------> Accton's DOS/ODI driver
%PLTREE%\PROGRAMS\nxodi /ln:0 /ses:14 /nam:17
REM
Example ----- NET.CFG
Link Driver MPX2ODI
Frame ETHERNET_II
Protocol IPX 8137 ETHERNET_II
Port 300
INT 3
C) Install Accton's Packet driver for Power Lan
=============================================
To install Accton packet driver at Power Lan system:
1.) Copy Accton's packet driver "NWPD.COM" from A:\PKTDRV to
C:\PL\PROGRAMS
2.) Use Power Lan install program, and select "NXPACKET" item,
then add Accton's packet driver "NWPD.COM" before NXPACKET.EXE
at C:\PL\ADMIN\SYS\PLSTART.BAT's "start NETBIOS" section
Example ----- PLSTART.BAT
if %PLTREE%. == . set PLTREE=C:\PL
REM
REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
REM
%PLTREE%\NWPD 0x60 ------> Accton's packet driver
%PLTREE%\PROGRAMS\nxpacket /ln:0 /ses:14 /nam:17 /li:0x60
-- THE END --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.