ENU_CrashDmp.txt Driver File Contents (intel-lan_msft_v18.3-whql.zip)

Intel(R) iSCSI Crash Dump Utility
====================================
September 17, 2012


DISCLAIMER
==========

This software is furnished under license and may only be used or copied
in accordance with the terms of the license.  The information in this
manual is furnished for informational use only, is subject to change
without notice, and should not be construed as a commitment by Intel
Corporation.  Intel Corporation assumes no responsibility or liability
for any errors or inaccuracies that may appear in this document or any
software that may be provided in association with this document.  Except
as permitted by such license, no part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means
without the express written consent of Intel Corporation.

Contents
========

- OVERVIEW
- COMMAND LINE PARAMETERS
- CUSTOMER SUPPORT
- LEGAL


Overview
========
This utility allows you to configure iSCSI crash dump file generation from 
the Microsoft* Windows* command line. 

NOTE: Make sure the Microsoft iSCSI Initiator Service is running before you
run this utility. For Microsoft Windows Server 2003, you must download and
install the Microsoft iSCSI Initiator. Later operating systems include the
software. See HOTFIX KB939875 for more information.


Command Line Parameters
=======================
  -GET_ISCSI      Displays whether iSCSI boot crash dump is enabled or disabled.
  -ISCSI_ENABLE   Enables iSCSI boot crash dump file generation.
  -ISCSI_DISABLE  Disables iSCSI boot crash dump file generation.


Customer Support
================

- Main Intel web support site: http://support.intel.com

- Network products information: http://www.intel.com/network


Legal / Disclaimers
===================

Copyright (C) 2012, Intel Corporation.  All rights reserved.

Intel Corporation assumes no responsibility for errors or omissions in this
document.  Nor does Intel make any commitment to update the information
contained herein.

Intel is a trademark of Intel Corporation in the U.S. and/or other countries.

* Other product and corporate names may be trademarks of other companies and
are used only for explanation and to the owners' benefit, without intent to
infringe.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.76