1. ethernet_drivers.exe Driver
2. LANMAN.TXT File Contents

LANMAN.TXT Driver File Contents (ethernet_drivers.exe)

3Com Corporation
3Com Megahertz 10/100 LAN CardBus PC Card 
LAN Manager Installation Information


Microsoft LAN Manager versions 2.0, 2.1, and 2.2

The LAN Installation Disk does not contain a subdirectory 
structure and files that make it an OEM import 
disk for the LAN Manager installer.  

You must create a subdirectory structure on 
another diskette to make it an OEM import disk.
The structure should look like this.

create A:\MSLANMAN.DOS  
create A:\MSLANMAN.DOS\DRIVERS
create A:\MSLANMAN.DOS\DRIVERS\NIF
create A:\MSLANMAN.DOS\DRIVERS\ETHERNET
create A:\MSLANMAN\DOS\DRIVERS\ETHERNET\ELPC575
copy LAN Installation DISK file \NDIS2\ELPC575.NIF 
to OEM import disk A:\MSLANMAN.DOS\DRIVERS\NIF\ELPC575.NIF
copy LAN Installation DISK file \NDIS2\ELPC575.DOS to 
OEM import disk A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC575\ELPC575.DOS
copy LAN Installation DISK file \NDIS2\PROTOCOL.INI to 
OEM import disk A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC575\PROTOCOL.INI

Use the import function of the LAN Manager installer 
to capture the NDIS driver from the OEM Import Disk.  

Be sure to save the new configuration before exiting the
installer.

This procedure describes how to  import the 
network driver for LAN Manager 2.2 for DOS.

1.  Insert the MS-DOS Setup diskette and 
    type: A:\SETUP.

2.  After reading the Microsoft Drivers 1 diskette, 
    a window shows available Network Adapter Drivers.  
    Select:

    Select Other Driver         (Alt-D)

3.  When prompted to insert your network driver 
    diskette, insert the OEM Import Disk.

    After the driver is imported from the OEM Import Disk, 
    a box appears, showing the driver.  
    
4   Select the 3Com Megahertz 10/100 LAN CardBus PC Card driver.

5.  Select a protocol to use with the PC Card.

6.  Edit the CONFIG.SYS file and exclude the CIS memory address.
    The driver installation is complete.


%VER Version 1.000.000