; ASPEED Graphics Windows WDDM Driver Release Notes ;=============================================================================== v.0.98.01: ycchen@090513 01.[New] [Win8] Support Win2012R2, Win8.1 x86/x64 02.[Bug] [Win8] Fixed HCK2.1 - FPO Optomization Check Failed Issue 03.[Bug] [Win8] Fixed HCK2.1 - Device Driver INF Verification Failed Issue v.0.98.00: ycchen@080306 01.[New] [Win8] Support Multi-Adapters 02.[Bug] [Win8] Force to VGA Mode for embedded CRT enabled platform 03.[New] [Win8] Use MMIO Mode instead of Legacy Relocate IO Access 04.[Bug] [ite66121] Fixed I2C interrupt be trigerred issue 05.[Bug] [ite66121] Fixed Read EDID un-stable issue 06.[Bug] [Win8] Fixed Reboot Stressed Hanged Issue, ycchen@080313 ------------------------------------------------------------------------------- v.0.97.06: ycchen@022013 01.[Bug] [Win8] H/W cursor did not be disabled properly if unload driver 02.[Bug] [Win8] Fixed TDR timeout issue 03.[Bug] [AST2000] Fixed display abnormal issue 04.[New] Modify for Read EDID Stability v.0.97.05: ycchen@122512 01.[New] Remove Wide Screen Mode if the prefer timing of the monitor is not wide screen mode v.0.97.04: ycchen@121112 01.[New] Support ITE66121 on AST2300/2400 ------------------------------------------------------------------------------- v.0.96.06: ycchen@120512 01.[Bug] [Win8] Fixed S3 resume failed issue 02.[New] [Win8] remove double buffer limitation 03.[New] [Win8] [AST2300] Disable ASPM v.0.96.05: ycchen@111412 01.[Bug] [Win8] Fixed HCK - GammaRamp Test Failed Issues 02.[Bug] Modify DRAM Setting by H/W request v.0.96.04: ycchen@102312 01.[Bug] [Win8] Fixed iKVM not work peroperly issue 02.[Bug] [Win8] Fixed HCK - WDDM CCD Test connectivity status failed issue v.0.96.03: ycchen@101512 01.[Bug] [Win8] Add I2C Interface and SetPalette DDI for WHCK Certification 02.[Bug] [Win8] Modify INF filefor WHCK certification v.0.96.02: ycchen@100312 01.[Bug] [Win8] Fixed cause bug check 0x50 if runing HCK\WDDM PnPStopModeSwitch Test v.0.96.01: ycchen@092812 01.[Bug] [Win8] Fixed ASPEED gaphics driver cannot install properly with GOP driver on Windows Server 2012 v.0.96.00: ycchen@090512 01.[Bug] Fixed 1920x1080 Screen not Full on SAMSUNG SyncMaster BX2231 02.[New] Support 1600x900 60Hz (CVT Reduced Blank) 03.[Bug] Fixed resolution cannot above than 1400x900 if attached non-PnP monitor, ycchen@082912 04.[Bug] [AST1300] Fixed AST1300 cannot support wide screen mode 05.[New] Set CVT non-reduced blank as default timing for 1280x800, 1400x900, 1650x1080, ycchen@090512 06.[Bug] [AST2400] Fixed adapter info. in display page is in-correct ------------------------------------------------------------------------------- v.0.95.01: ycchen@052112 01.[Bug] Fixed iKVM cannot display properly with older VBIOS (before v.0.92.00) 02.[New] [AST2300] Modify DRAM settings by H/W request (2012_05_09) 03.[Bug] [AST2300] Avoid I2C1 lock issue if customer I2C1 layout is not correct 04.[New] Support 1360x768 60Hz v.0.95.00: ycchen@041212 01.[New] [AST2400] Support AST2400 02.[New] Support on Windows 8 Customer Preview ------------------------------------------------------------------------------- v.0.93.09: ycchen@061711 01.[2008R2] Fixed 1600x1200 60Hz didn't show in the mode list if use ASUS VK247H Monitor v.0.93.08: ycchen@053111 01.[New] [AST2300] Modify MCLK to 396MHz by H/W request v.0.93.07 by ycchen@050511 01.[Bug] Fixed system hanged if attach Synco 19" LCD Monitor, ycchen@050111 02.[Bug] Fixed 640x480 256c display abnormal issue, ycchen@050411 03.[Bug] Fixed 60/70/72Hz disappear issue on Benq HD2200, ycchen@050511 04.[Bug] Fixed it takes too long time to get EDID from EDID failed monitor 05.[Bug] Fixed cursor display abnormal while playing kmplayer v.0.93.06: ycchen@042911 01.[Bug] Fixed screen abnormal if resume from monitor off, ycchen@042111 02.[Bug] Fixed 256c mode color and cursor abnormal issue, ycchen@042511 03.[Bug] Fixed Driver can't load properly issue under Vista/Server2008, ycchen@042611 04.[Bug] Fixed Read EDID unstable issue, ycchen@042711 05.[Bug] Fixed Mode List Include Monitor Unsupport Modes v.0.93.05: ycchen@042111 01.First releaseDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.