Intel(R) iSCSI Crash Dump Utility ==================================== September 17, 2012 DISCLAIMER ========== This software is furnished under license and may only be used or copied in accordance with the terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document. Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation. Contents ======== - OVERVIEW - COMMAND LINE PARAMETERS - CUSTOMER SUPPORT - LEGAL Overview ======== This utility allows you to configure iSCSI crash dump file generation from the Microsoft* Windows* command line. NOTE: Make sure the Microsoft iSCSI Initiator Service is running before you run this utility. For Microsoft Windows Server 2003, you must download and install the Microsoft iSCSI Initiator. Later operating systems include the software. See HOTFIX KB939875 for more information. Command Line Parameters ======================= -GET_ISCSI Displays whether iSCSI boot crash dump is enabled or disabled. -ISCSI_ENABLE Enables iSCSI boot crash dump file generation. -ISCSI_DISABLE Disables iSCSI boot crash dump file generation. Customer Support ================ - Main Intel web support site: http://support.intel.com - Network products information: http://www.intel.com/network Legal / Disclaimers =================== Copyright (C) 2012, Intel Corporation. All rights reserved. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. Intel is a trademark of Intel Corporation in the U.S. and/or other countries. * Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.