nvspbind.txt Driver File Contents (Intel_LAN_v18.3_Windows_32.zip)

NVSBIND - Network Binding Command Line Utility
==============================================

November 25, 2009


Contents
========
- Overview
- Usage Notes
- Legal


Overview
========

NVSPBIND is a tool for modifying network bindings from the command line. It is 
useful in Server Core environments with the Hyper-V role enabled. NVSPBIND can 
be used to set bindings for NICs used in Virtual Networks. It can also enable 
or disable specific bindings on any NIC.

NVSPBIND utilizes the INetCfg APIs documented on MSDN 
(http://msdn.microsoft.com/en-us/library/ms805265.aspx).

To get help run “nvspbind.exe /?”


Usage Notes
===========

Usage: nvspbind.exe [option] [NIC|*] [protocol|*]

Options:
-d disable binding of specified protocol from specified NIC(s)
-e enable binding of specified protocol to specified NIC(s)
-f show full bind path
-n NIC information only

If no option is specified, it will display a list of NICs in the system and 
which protocols are enabled and disabled on the NIC. For example:

  {84126140-2922-4128-B4D6FAF842C78267}
  "pci\ven_8086&dev_10f5&subsys_20ee17aa"
  "Intel(R) 82567LM Gigabit Network Connection":
     enabled:  ms_netbios       (NetBIOS Interface)
     enabled:  ms_server        (File and Printer Sharing for Microsoft Networks)
     enabled:  mfe_firehk       (McAfee NDIS Intermediate Filter)
     enabled:  ms_psched        (QoS Packet Scheduler)
     enabled:  ms_msclient      (Client for Microsoft Networks)
     enabled:  ms_netbt         (WINS Client(TCP/IP) Protocol)
     enabled:  ms_tcpip         (Internet Protocol (TCP/IP))
     enabled:  ms_ndisuio       (NDIS Usermode I/O Protocol)
     enabled:  ms_pppoe         (Point to Point Protocol Over Ethernet)

You can specify the NIC either by GUID (“{84126140-2922-4128-B4D6FAF842C78267}” 
in this example) or DisplayName (“Intel(R) 82567LM Gigabit Network connection” 
in this example).

You can specify the protocol by the name provided (for example “ms_tcpip” or 
"ms_msclient").

You can use a * to specify all NICs or all Protocols. For example:

  nvspbind.exe -d "Intel(R) 82567LM Gigabit Network Connection" *

  nvspbind.exe -e * ms_tcpip


Legal
=====

Copyright (c) 2009, Intel Corporation.

This Network Binding Command Line Utility ("Software") is furnished under 
license and may only be used or copied in accordance with the terms of that 
license. No license, express or implied, by estoppel or otherwise, to any 
intellectual property rights is granted by this document. The Software is 
subject to change without notice, and should not be construed as a commitment by 
Intel Corporation to market, license, sell or support any product or technology. 
Unless otherwise provided for in the license under which this Software is 
provided, the Software is provided AS IS, with no warranties of any kind, express 
or implied. Except as expressly permitted by the Software license, neither Intel 
Corporation nor its suppliers assumes any responsibility or liability for any 
errors or inaccuracies that may appear herein. Except as expressly permitted by 
the Software license, no part of the Software may be reproduced, stored in a 
retrieval system, transmitted in any form, or distributed by any means without 
the express written consent of Intel Corporation.

* Other product and corporate names may be trademarks of other companies and
are used only for explanation and to the owners' benefit, without intent to
infringe.

Hyper-V Network VSP Bind Application 6.1.7122.0
Copyright (c) Microsoft Corporation. All rights reserved.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.65