iaAHCIB.inf Driver File Contents (Intel_Storage_AHCI-SATARAID_v3.8.0.1113_Win7_32_Win8_32_2k8_32.zip)

; Copyright (c) 2009-2012  Intel Corporation   
; **********************************************************************************************   
; **********************************************************************************************   
; **    Filename:  iaAHCIB.inf  
; **    Revision:  08/14/2013,3.8.0.1106 
; **    Abstract:  Windows* INF File for AHCI Intel(R) Rapid Storage Technology Enterprise Driver   
; **               Installs: RSTe AHCI Controller Miniport  
; **********************************************************************************************   
[Version]   
Signature="$Windows NT$"   
Provider=%INTEL%   
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}   
Class=SCSIAdapter   
CatalogFile=iaAHCIB.cat 
DriverVer=08/14/2013,3.8.0.1106
;  
[PackageInfo]   
Name=AHCIB   
;  
[SourceDisksNames]   
1 = %DiskId1%,,,""   
[DestinationDirs]   
DefaultDestDir = 12   
;  
[ControlFlags]   
ExcludeFromSelect = *   
;  
[Manufacturer]   
%INTEL% = INTEL, NTx86.6.2  
;  
[iaStorB_Service_Inst]  
ServiceType    = %SERVICE_KERNEL_DRIVER%   
StartType      = %SERVICE_BOOT_START%   
ErrorControl   = %SERVICE_ERROR_NORMAL%   
ServiceBinary  = %12%\iaStorB.sys  
LoadOrderGroup = SCSI miniport   
AddReg         = pnpsafe_pci_addreg   
;  
[iaStorB_EventLog_Inst]  
AddReg = iaStorB_EventLog_AddReg  
;  
[iaStorB_EventLog_AddReg]  
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\iaStorB.sys" 
HKR,,TypesSupported,%REG_TYPE_DWORD%,7   
;  
;******************************************************************************   
;*   
;* 32-BIT X86 ARCHITECTURE   
;*   
;* This section specifies the 32-bit architecture specific INF file entries   
;* required to install a driver as a 32-bit compatible driver.   
;*   
;******************************************************************************   
[SourceDisksFiles.x86]   
iaStorB.sys = 1,,,  
;  
[INTEL.NTx86.6.2]  
;windows_8_32-bit  
%PCI\VEN_8086&DEV_8D62&CC_0106.DeviceDesc% = iaStorB_inst, PCI\VEN_8086&DEV_8D62&CC_0106 
%PCI\VEN_8086&DEV_1F32&CC_0106.DeviceDesc% = iaStorB_inst, PCI\VEN_8086&DEV_1F32&CC_0106 
; 
[iaStorB_inst.ntx86]  
CopyFiles=@iaStorB.sys 
; 
[iaStorB_inst.ntx86.HW] 
AddReg = msi_addreg  
AddReg = storport_addreg  
;  
[iaStorB_inst.ntx86.Services]  
AddService = iaStorB, %SPSVCINST_ASSOCSERVICE%, iaStorB_Service_Inst, iaStorB_EventLog_Inst  
;   
[pnpsafe_pci_addreg]  
; Use raw values for BusType, not a DEFINE, ChkInf fails on hex alpha chars   
; BusType_ATA == 0x3, BusTypeATA, BusType_RAID == 0x8, BusType_SATA == 0xb  
HKR, Parameters\PnpInterface,  5,                           %REG_TYPE_DWORD%,  0x00000001   
HKR, Parameters,               BusType,                     %REG_TYPE_DWORD%,  0x0000000b  
; Tell Storport in Win7/Srv08R2(KB982018) that driver can report 4K sector size (not needed in Win8)  
HKR, Parameters\Device,        EnableQueryAccessAlignment,  %REG_TYPE_DWORD%,  0x00000001  
;  
[Strings]   
;   
; Localizable Strings   
;   
diskId1 = "RSTe AHCI Installation Disk"   
;server  
PCI\VEN_8086&DEV_8D62&CC_0106.DeviceDesc    = "Intel(R) C600+/C220+ series chipset sSATA AHCI Controller" 
PCI\VEN_8086&DEV_1F32&CC_0106.DeviceDesc    = "Intel(R) C600+/C220+ series chipset sSATA AHCI Controller" 
;  
INTEL = "Intel Corporation"  
; Non-Localizable Strings   
;   
SPSVCINST_ASSOCSERVICE = 0x00000002   
REG_MULTI_SZ           = 0x00010000   
REG_EXPAND_SZ          = 0x00020000   
REG_TYPE_DWORD         = 0x00010001   
SERVICE_KERNEL_DRIVER  = 1   
SERVICE_BOOT_START     = 0   
SERVICE_ERROR_NORMAL   = 1  
;  
; MSI enables.   
[msi_addreg]    
HKR, Interrupt Management, 0x00000010    
HKR, Interrupt Management\MessageSignaledInterruptProperties, 0x00000010    
HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported,       %REG_TYPE_DWORD%,   1    
HKR, Interrupt Management\MessageSignaledInterruptProperties, MessageNumberLimit, %REG_TYPE_DWORD%,   1   
;  
[storport_addreg]  
;;; Enables/Disables Idle Power Management for StorPort  
HKR, "StorPort", "EnableIdlePowerManagement", %REG_TYPE_DWORD%, 0x00000000  
;  
[DefaultInstall] 
CopyFiles=@iaStorB.sys 
AddReg = msi_addreg 
AddReg = storport_addreg 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.77