//====================================================================== // ASIX AX88178 Windows 7 32-bit driver // Revision History // // This document describes the major changes, additions and bug fixes made // to the driver between released versions. //====================================================================== Version 1.12.6.0 (2013-07-12) 1. Fixed Jumbo Frame failed issue. Version 1.12.5.0 (2013-02-04) 1. Fixed Oid_Multicast_List failed issue. Version 1.12.4.0 (2012-10-15) 1. Fixed TX/RX DPC timeout issue on Windows 8 2. Changed numbering rule. Version 1.12.3.8 (2010-11-24) 1. Support GMII MAC to MAC mode. 2. Support Vitesse VSC8601 GigaPHY. 3. Support Goodway's AX2300 X2 (Realtek RTL8211CL) GigaPHY LED setting. Version 1.12.3.7 (2009-10-02) 1. Modify to support new Netronix's AX88178 + Realtek RTL8211CL GigaPHY LED setting. Version 1.12.3.6 (2009-09-28) 1. Change the speed mode setting as the same as the AX88772/772A driver. Version 1.12.3.5 (2009-09-25) 1. Fix the media mode setting after resume from suspend mode. Version 1.12.3.4 (2009-09-16) 1. Fix the RGMII setting for Realtek RTL8211CL, RTL8211BN & RTL8251CL GigaPHY. 2. Do software reset when initialize Realtek RTL8211CL, RTL8211BN & RTL8251CL GigaPHY. Version 1.12.3.3 (2009-09-11) 1. Fix the link speed detection function when force PHY link speed. Version 1.12.3.2 (2009-08-27) 1. Fix TX failure if unplug Ethernet cable and then plug Ethernet cable when network traffic is heavy. Version 1.12.3.1 (2009-08-12) 1. Initial release for WIndows 7. (Modified from AX88178 Vista 32-bit driver v1.8.3.5) 2. Support Realtek RTL8211CL, RTL8211BN & RTL8251CL GigaPHY solutions. 3. Modify to support new Edimax's AX88178 + Marvell 88E1111 GigaPHY LED setting. 4. Add USB error handling policy to process specific USB error. 5. Add DisplayLink USB bandwidth solution. Note: Please double check the following driver parameters settings for normal operation when the "Jumbo Packet" parameter was enabled (i.e. set to "4088 Bytes" or "9014 Bytes"), 1. Set the "Connection Type" parameter to "1000BaseT Full_Duplex". 2. Enable the "Flow Control" parameter.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.