[intel 810 chipset, MicroATX / ATX)] Award BIOS 81115ICW.BIN BIOS for N.S. Super IO chip, ICW W195BH clock generator .Firmware Hub = intel N82802AB / SST 49LF004 .Fixed Win98SE Shut Down problem with AMR Modem Card (Nov/2000) 80811ICS.BIN BIOS for N.S. Super IO chip, ICS 9248BF-87 clock generator .Firmware Hub = intel N82802AB / SST 49LF004 .Added support on Cyrix(VIA)-III CPU .Removed power up message "Suggested SDRAM CAS Latency =xx" (Aug/2000) 0901ICW2.BIN BIOS for N.S. Super IO chip, ICW W195BH clock generator .Firmware Hub = SST 49LF002 .Added support on "Tualatin-Celeron" CPU (Sept/2001) *** Remark : The BIOS support on "Tualatin-Celeron" CPU is only valid for the "Tualatin-Ready" motherboards with update hardware circuitry. *** Important *** Please identify the clock generator IC on your motherboard, and the Firmware Hub IC types before updating the BIOS. Upgrading with a wrong BIOS file may result in failure to power up after the upgrade ! The Firmware Hub IC is the component which host the BIOS codes, and comes covered with the Award Label.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.