; Copyright (c) 2009-2012 Intel Corporation
; **********************************************************************************************
; **********************************************************************************************
; ** Filename: iaStorS.inf
; ** Revision: 08/07/2012,3.5.0.1092
; ** Abstract: Windows* INF File for SCU Intel(R) Rapid Storage Technology Enterprise Driver
; ** Installs: RSTe SCU RAID Controller Miniport + RST Filter Driver
; **********************************************************************************************
;
[Version]
Signature = "$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%INTEL%
CatalogFile=iaStorS.cat
DriverVer=08/07/2012,3.5.0.1092
;
[PackageInfo]
Name=SCU
;
[SourceDisksNames]
1 = %DiskId1%,,,""
;
[DestinationDirs]
DefaultDestDir = 12
;
[ControlFlags]
ExcludeFromSelect = *
;
[Manufacturer]
%INTEL% = INTEL, NTx86.5.2, NTamd64
;
[Intel_SCU_iaStorS_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\iaStorS.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_pci_addreg
AddReg = UserParameters
;AddReg = msienable_addreg
;
[Intel_SCU_EventLog_Inst]
AddReg = Intel_SCU_EventLog_Inst.AddReg
;
[Intel_SCU_EventLog_Inst.AddReg]
HKR,,EventMessageFile,%REG_TYPE_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\iaStorS.sys"
HKR,,TypesSupported,%REG_TYPE_DWORD%,7
;
[iaStorF_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\iaStorF.sys
;
[iaStorF_EventLog_Inst]
AddReg = iaStorF_EventLog_AddReg
;
[iaStorF_EventLog_AddReg]
HKR,,EventMessageFile,%REG_TYPE_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_TYPE_DWORD%,7
;
;******************************************************************************
;*
;* 32-BIT X86 ARCHITECTURE
;*
;* This section specifies the 32-bit architecture specific INF file entries
;* required to install a driver as a 32-bit compatible driver.
;*
;******************************************************************************
[SourceDisksFiles.x86]
iaStorS.sys = 1,,,
iaStorF.sys = 1,,,
;
[INTEL.NTx86.5.2]
;;; SCU 0 Device IDs
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D60
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D61
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D64
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D65
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D68
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D69
%Intel_SATA_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D6A
%Intel_SATA_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D6B
;
[Intel_SCU_iaStorS_Inst.NTx86]
CopyFiles = @iaStorS.sys
CopyFiles=@iaStorF.sys
;
[Intel_SCU_iaStorS_Inst.NTx86.HW]
AddReg = iaStorF_addreg
AddReg = msienable_addreg
AddReg = storport_addreg
Include = machine.inf
Needs = PciIoSpaceNotRequired
;
[Intel_SCU_iaStorS_Inst.NTx86.Services]
AddService = iaStorS,%SPSVCINST_ASSOCSERVICE%,Intel_SCU_iaStorS_Service_Inst, Intel_SCU_EventLog_Inst
AddService = iaStorF, , iaStorF_Service_Inst, iaStorF_EventLog_Inst
;
;******************************************************************************
;*
;* 64-BIT X86 ARCHITECTURE
;*
;* This section specifies the 64-bit architecture specific INF file entries
;* required to install a driver as a 64-bit compatible driver.
;*
;******************************************************************************
[SourceDisksFiles.amd64]
iaStorS.sys = 1,,,
iaStorF.sys = 1,,,
;
[INTEL.NTamd64]
;
;;; SCU Device IDs
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D60
%Intel_SATA_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D61
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D62
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D63
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D64
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D65
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D66
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D67
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D68
%Intel_SAS_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D69
%Intel_SATA_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D6A
%Intel_SATA_RAID.Desc% = Intel_SCU_iaStorS_Inst,PCI\VEN_8086&DEV_1D6B
;
[Intel_SCU_iaStorS_Inst.ntamd64]
CopyFiles = @iaStorS.sys
CopyFiles=@iaStorF.sys
;
[Intel_SCU_iaStorS_Inst.ntamd64.HW]
AddReg = iaStorF_addreg
AddReg = msienable_addreg
AddReg = storport_addreg
Include = machine.inf
Needs = PciIoSpaceNotRequired
;
[Intel_SCU_iaStorS_Inst.ntamd64.Services]
AddService = iaStorS,%SPSVCINST_ASSOCSERVICE%,Intel_SCU_iaStorS_Service_Inst, Intel_SCU_EventLog_Inst
AddService = iaStorF, , iaStorF_Service_Inst, iaStorF_EventLog_Inst
;
;******************************************************************************
;*
;* RST FILTER Driver REGISTRY CHANGES
;*
;* This section specifies the registry entries necessary to add the lower disk
;* class RST Filter driver. Layer the RST Filter driver under all Disk class
;* GUID devices as a lower disk class filter..
;*
;******************************************************************************
[iaStorF_addreg]
HKLM, System\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}, LowerFilters, 0x00010008, iaStorF
;
;******************************************************************************
;*
;* PLUG-N-PLAY REGISTRY CHANGES
;*
;* This section specifies the registry entries necessary to indicate support
;* for Plug-n-Play.
;*
;******************************************************************************
[pnpsafe_pci_addreg]
HKR, Parameters\PnpInterface, 5, %REG_TYPE_DWORD%, 0x00000001
;
; BusType 0xA == BusTypeSas (winioctl.h)
; PCI subclass code indicates SAS (not RAID), so for WHQL, the BusType
; needs to match
HKR, Parameters, BusType, %REG_TYPE_DWORD%, 0x0000000A
HKR, Parameters\Device, EnableQueryAccessAlignment, %REG_TYPE_DWORD%, 0x00000001
;******************************************************************************
;*
;* MSI/MSI-X REGISTRY CHANGES
;*
;* This section specifies the registry entries necessary in order to indicate
;* this driver supports MSI-X.
;*
;******************************************************************************
[msienable_addreg]
;;; Indicate we support MSIx up to 2 message vectors
;HKR, Interrupt Management, , %REG_TYPE_KEY_ONLY%
HKR, Interrupt Management, 0x00000010
HKR, Interrupt Management\MessageSignaledInterruptProperties, 0x00000010
HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported, %REG_TYPE_DWORD%, 1
[storport_addreg]
;;; Force StorPort to keep all sense data in Pre-Win8 OSes (max value is 255)
HKR, StorPort, TotalSenseDataBytes, %REG_TYPE_DWORD%, 0x000000FF
;******************************************************************************
;*
;* USER PARAMETER REGISTRY CHANGES
;*
;* This section specifies the parameters that users can modify in the
;* registry that will change the operation of the driver after a power
;* cycle of the system or a reinstall of the driver.
;*
;******************************************************************************
[UserParameters]
;;; Build the Registry Directories
HKR, Parameters, Device, %REG_TYPE_KEY_ONLY%
;
;;; Add the RAID features
HKR, Parameters\Device, ReadPatrol, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, RebuildOnHotInsert, %REG_TYPE_BINARY%, 0x00000000
;
;;; Add the Controller wide user parameters
HKR, Parameters\Device, ControllerDeviceSpinUpDelayInterval, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, ControllerInterruptCoalescenceNumber, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, ControllerInterruptCoalescenceTimer, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, ControllerSataNcqEnable, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, ControllerSataNcqDepthMaximum, %REG_TYPE_DWORD%, 0x00000020
HKR, Parameters\Device, ControllerSataStandbyTimerEnable, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, ControllerSataNonZeroBufferOffsetEnable, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, ControllerInitialResetType, %REG_TYPE_DWORD%, 0x00000008
HKR, Parameters\Device, ControllerClearAffiliationEnable, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, StpInactivityTimeout, %REG_TYPE_DWORD%, 0x00000005
HKR, Parameters\Device, SspInactivityTimeout, %REG_TYPE_DWORD%, 0x00000005
HKR, Parameters\Device, StpMaxOccupancyTimeout, %REG_TYPE_DWORD%, 0x00000005
HKR, Parameters\Device, SspMaxOccupancyTimeout, %REG_TYPE_DWORD%, 0x00000014
HKR, Parameters\Device, NoOutBoundTaskTimeout, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, IgnoreFUA, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, PerformanceOptimizationsEnable, %REG_TYPE_DWORD%, 0x00000000
;
HKR, Parameters\Device, InterruptCoalescingSampleSize, %REG_TYPE_DWORD%, 0x0000000a
HKR, Parameters\Device, InterruptCoalescingSampleFrequency, %REG_TYPE_DWORD%, 0x00000064
HKR, Parameters\Device, InterruptCoalescingThreshold, %REG_TYPE_DWORD%, 0x00002800
HKR, Parameters\Device, InterruptCoalescingLowNumber, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, InterruptCoalescingLowTimeout, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, InterruptCoalescingHighNumber, %REG_TYPE_DWORD%, 0x00000010
HKR, Parameters\Device, InterruptCoalescingHighTimeout, %REG_TYPE_DWORD%, 0x00000002
;
;;; Add the Phy specific user parameters
HKR, Parameters\Device, Phy0NotifyEnableSpinupInsertionFrequency, %REG_TYPE_DWORD%, 0x00000033
HKR, Parameters\Device, Phy0AlignInsertionFrequency, %REG_TYPE_DWORD%, 0x0000007f
HKR, Parameters\Device, Phy0InConnectionAlignInsertionFrequency, %REG_TYPE_DWORD%, 0x000000ff
HKR, Parameters\Device, Phy1NotifyEnableSpinupInsertionFrequency, %REG_TYPE_DWORD%, 0x00000033
HKR, Parameters\Device, Phy1AlignInsertionFrequency, %REG_TYPE_DWORD%, 0x0000007f
HKR, Parameters\Device, Phy1InConnectionAlignInsertionFrequency, %REG_TYPE_DWORD%, 0x000000ff
HKR, Parameters\Device, Phy2NotifyEnableSpinupInsertionFrequency, %REG_TYPE_DWORD%, 0x00000033
HKR, Parameters\Device, Phy2AlignInsertionFrequency, %REG_TYPE_DWORD%, 0x0000007f
HKR, Parameters\Device, Phy2InConnectionAlignInsertionFrequency, %REG_TYPE_DWORD%, 0x000000ff
HKR, Parameters\Device, Phy3NotifyEnableSpinupInsertionFrequency, %REG_TYPE_DWORD%, 0x00000033
HKR, Parameters\Device, Phy3AlignInsertionFrequency, %REG_TYPE_DWORD%, 0x0000007f
HKR, Parameters\Device, Phy3InConnectionAlignInsertionFrequency, %REG_TYPE_DWORD%, 0x000000ff
HKR, Parameters\Device, Controller0Phy0MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, Controller0Phy1MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, Controller0Phy2MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, Controller0Phy3MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, Controller1Phy0MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, Controller1Phy1MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, Controller1Phy2MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
HKR, Parameters\Device, Controller1Phy3MaxSpeedGeneration, %REG_TYPE_DWORD%, 0x00000002
;
;;; Add the Port specific OEM parameters
HKR, Parameters\Device, OemHeaderVersion, %REG_TYPE_DWORD%, 0x00000010
HKR, Parameters\Device, Controller0OemModeType, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller0OemConcurrentDeviceSpinUpCount,%REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller0OemSscEnable, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller0OemPort0PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller0OemPort1PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller0OemPort2PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller0OemPort3PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller0OemPhy0SasAddressLow, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller0OemPhy0SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller0OemPhy1SasAddressLow, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller0OemPhy1SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller0OemPhy2SasAddressLow, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller0OemPhy2SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller0OemPhy3SasAddressLow, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller0OemPhy3SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller0OemPhy0AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller0OemPhy0AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller0OemPhy0AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller0OemPhy0AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
HKR, Parameters\Device, Controller0OemPhy1AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller0OemPhy1AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller0OemPhy1AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller0OemPhy1AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
HKR, Parameters\Device, Controller0OemPhy2AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller0OemPhy2AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller0OemPhy2AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller0OemPhy2AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
HKR, Parameters\Device, Controller0OemPhy3AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller0OemPhy3AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller0OemPhy3AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller0OemPhy3AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
;
HKR, Parameters\Device, Controller1OemModeType, %REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller1OemConcurrentDeviceSpinUpCount,%REG_TYPE_DWORD%, 0x00000001
HKR, Parameters\Device, Controller1OemSscEnable, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller1OemPort0PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller1OemPort1PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller1OemPort2PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller1OemPort3PhyMask, %REG_TYPE_DWORD%, 0x00000000
HKR, Parameters\Device, Controller1OemPhy0SasAddressLow, %REG_TYPE_DWORD%, 0x00000004
HKR, Parameters\Device, Controller1OemPhy0SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller1OemPhy1SasAddressLow, %REG_TYPE_DWORD%, 0x00000004
HKR, Parameters\Device, Controller1OemPhy1SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller1OemPhy2SasAddressLow, %REG_TYPE_DWORD%, 0x00000004
HKR, Parameters\Device, Controller1OemPhy2SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller1OemPhy3SasAddressLow, %REG_TYPE_DWORD%, 0x00000004
HKR, Parameters\Device, Controller1OemPhy3SasAddressHigh, %REG_TYPE_DWORD%, 0x5FCFFFFF
HKR, Parameters\Device, Controller1OemPhy0AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller1OemPhy0AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller1OemPhy0AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller1OemPhy0AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
HKR, Parameters\Device, Controller1OemPhy1AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller1OemPhy1AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller1OemPhy1AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller1OemPhy1AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
HKR, Parameters\Device, Controller1OemPhy2AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller1OemPhy2AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller1OemPhy2AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller1OemPhy2AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
HKR, Parameters\Device, Controller1OemPhy3AfeTxAmpControl0, %REG_TYPE_DWORD%, 0x000BDD08
HKR, Parameters\Device, Controller1OemPhy3AfeTxAmpControl1, %REG_TYPE_DWORD%, 0x000B7069
HKR, Parameters\Device, Controller1OemPhy3AfeTxAmpControl2, %REG_TYPE_DWORD%, 0x000B7C09
HKR, Parameters\Device, Controller1OemPhy3AfeTxAmpControl3, %REG_TYPE_DWORD%, 0x000AFC6E
HKR, Parameters\Device, BackplaneIsPassive, %REG_TYPE_DWORD%, 0x00000000
;******************************************************************************
;*
;* INF FILE STRINGS (VARIABLES)
;*
;* This section specifies variables that can be reused elsewhere in this
;* INF file.
;*
;******************************************************************************
[Strings]
;;; *******Localizable Strings*******
diskId1 = "iaStorS Installation Disk"
Intel_SAS_RAID.Desc = "Intel(R) C600 Series Chipset SAS RAID Controller"
Intel_SATA_RAID.Desc = "Intel(R) C600 Series Chipset SAS RAID (SATA mode)"
INTEL = "Intel Corporation"
;
;;; *******Non Localizable Strings*******
SERVICE_BOOT_START = 0x0
SERVICE_SYSTEM_START = 0x1
SERVICE_AUTO_START = 0x2
SERVICE_DEMAND_START = 0x3
SERVICE_DISABLED = 0x4
SERVICE_KERNEL_DRIVER = 0x1
;
SERVICE_ERROR_IGNORE = 0x0
SERVICE_ERROR_NORMAL = 0x1
SERVICE_ERROR_SEVERE = 0x2
SERVICE_ERROR_CRITICAL = 0x3
;
REG_TYPE_BINARY = 0x00000001
REG_TYPE_KEY_ONLY = 0x00000010
REG_TYPE_DWORD = 0x00010001
REG_TYPE_EXPAND_SZ = 0x00020000
;
SPSVCINST_ASSOCSERVICE = 0x00000002
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.