Accton Technology Corporation
Novell NetWare Versions 386 DOS ODI Driver Installation
For EN2211, EN220X Ethernet Adapter
Copyright (C) 1992, 1993 by Accton Technology Corporation.
All rights reserved.
1. Things You Need
---------------
Before you start with the installation process make sure you have
the following :
a. Ethernet Pocket Hardware Driver Disk.
b. Novell DOS ODI WORKSTATION SERVICES diskette(WSGEN).
2. How To Install
--------------
You need following five files to install DOS ODI DRIVER.
a. LSL.COM ---- supported by Novell
b. EPMLID.COM ---- Novell DOS ODI Driver ,supported
by manufacturer
c. IPXODI.COM ---- supported by Novell
d. NETx.COM ---- supported by Novell
or
EMSNETx.EXE
or
XMSNETx.EXE
e. NET.CFG ---- optional,configuration file
After boot your workstation, type following comments on the console:
LSL <Enter>
EPMLID <Enter>
IPXODI <Enter>
NETx <Enter>
then,you can log in to the file server.
Normally, you will not need a NET.CFG file because the EPMLID.COM
can automatically detect hardware configurations. As a resault, you
don't need to assign the INT, PORT etc parameters. Although you
don't to assign parameters which has been described above, you can
still assign another parameters,for example, FRAME, NODE ADDRESS ..
etc. You can see Netware 386 Installation appendix E for more
information about NET.CFG.
Bellow is a sample NET.CFG file:
LINK DRIVER EPMLID
Frame Ethernet_II
Frame Ethernet_802.3
Protocol IPX 0 Ethernet_802.3
:
:
3. How To use DOS/ODI driver EPMLID.COM
------------------------------------
Insert the ACCTON EtherPocket Hardware Driver Disk into drive A:,
then type:
A:\> \EPP\EN-EPP ----> Set print port to EPP mode
A:\> \NETWARE\DOSODI\EPMLID [U] [8] [4] [T] [?] <Enter>
EPMLID -Installs the MLID
EPMLID U -Removes resident MLID from memory
EPMLID 8 -Force Ether-Pocket using Bidirection (8 bits) mode
EPMLID 4 -Force Ether-Pocket using No-Bidirection (4 bits) mode
EPMLID T -Increase delay time for 486/66 machine
EPMLID ? -Displays this help screen
=======================================================================
Novell, NetWare, Novell Advanced NetWare are registered
trademarks of Novell Incorporated. Ethernet is registered
trademark of Xerox Corporation. Other trademarks orbrand names
unintentionally omitted are trademarks or registered trademarks
of their respective companies.
=======================================================================
----the end----
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.