Accton Technology Corporation
EtherPocket EPP enabler
For EN2211 Ethernet Adapter
Copyright (C) 1993, 1994 by Accton Technology Corporation.
All rights reserved.
EN-EPP is an enabler program which can enable Enhanced Parallel Port(EPP)
or disable Enhanced Parallel Port. It can used as execution file or
device driver.
1. To run the EPP Enabler program as execution file
Insert the ACCTON EtherPocket Hardware Driver Disk into drive A:,
then type:
A:\> \EPP\EN-EPP <Enter>
If you want to disable the EPP mode, type
A:\> \EPP\EN-EPP U <Enter>
[U] This is an optional parameter that disable EPP mode
2. To run the EPP Enabler program as device driver
Add EN-EPP device driver before other network device driver
in config.sys as follows:
DEVICE=EN-EPP.EXE
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\ACCNE\ETHEP.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS
--- The End ---
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.