1. Rokwell_k56-V90.zip Driver
2. V90wiz.ini File Contents

V90wiz.ini Driver File Contents (Rokwell_k56-V90.zip)

;;================= Example V90Wiz.INI ==== this file updated 9/26/98

[General]
FileCnt=5
ValidatorCnt=4
PostFlashCmdCnt=5
QuickCheckMode=1
BackupDone=0
BackupFile=C:\V90\OrigBkup.S37

[Options]
BlueScreen=1
OnePortOnly=0   ; faster testing if you set this to a modem port
ForceBackup=1    ;if 1, user can't get past the wizard page without backing up firmware

LogoBmp=OemLogo.bmp
OemAbout=For use with K56flex modems built with Rockwell chipsets.
OemAboutWebPage=World Wide Web Site: http://www.rockwell.com
OemAboutSupport=Tech Support Hotline: 1-800-555-HELP
OemWarn=The following operation cannot be halted.\n\nAre you sure you want to continue?
ShowAndWait=1
TimedShow=0
ShowIfItu=0

[Files]
;-----------------------------------------------------------------------
; filename, loadOrder, Flags, friendlyName[64], Description[256]
; Flags:  LOADER or UNLOADER or FIRMWARE
;  and:   TRANS or FINAL or BKUP (BKUP is added added by program)
;
; be sure to set [General] FileCnt=
; leading spaces are stripped
;
File01=Xmfl8_UL.s37,  1, LOADER,         Firmware Loader,      FlashLoader -- loads via XModem
File02=Xmfl8_DL.s37,  1, UNLOADER,       Firmware Unloader,    Used to make Firmware backup via XModem
File03=2013CP1.s37, 2, FIRMWARE TRANS, K56flex V1.100, Updated K56flex (supports AT-ITU?)
File04=2100GP1.s37,  2, FIRMWARE FINAL, ITU V.90 Firmware,    V.90 Driver for internal modems
File05=OrigBkup.S37,2,FIRMWARE BKUP,Failsafe Backup, Firmware V2.100G_1MSVD-K56_DLS - Saved 09/28/98 16:00:48

[Validators]
;-----------------------------------------------------------------------
; ATI3,op,Ati3Text,ugCode,Maker,Model,Remark
; op can be:=(equals), * (contains), ! (notContains),  et.al.
; ugCode can be: UPDATABLE, TRANS, FINAL, or UNKNOWN
;
; leading spaces are stripped
; be sure to set [General] ValidatorCnt=
;
Validator01=ATI3, =, ATI3,               LOADFAULT, (Load Fault?), (Load Fault?), Maybe a modem in 'Load Fault' state
Validator02=ATI3, *, V1.120-K56_DLP,     UPDATABLE, Rockwell,    TestModem2,    a modem I have
Validator03=ATI3, =, V2.013C-K56_DLP,     TRANS,     Rockwell,    K56modem,    Been updated to Transitional
Validator04=ATI3, =, V2.100G-1MSVD-K56_DLP, FINAL,     Rockwell,    V90Modem,    Been updated to ITU v.90

[PostFlashCmds]
;-----------------------------------------------------------------------
; Cmd##=type,AT_Cmd_Text
; ugCode can be: BKUP, TRANS, or FINAL
; Commands send after a flashload.  Usually start these with AT
; leading spaces are stripped, max len is 128 per command; max cmds: 10
; be sure to set [General] PostFlasCmdCnt=
;
Cmd01=BKUP,AT&F\V1&W
Cmd02=TRANS,AT&F\V1&W
Cmd03=TRANS,AT&Z1=19492218018
Cmd04=FINAL,AT&F\V1&W
Cmd05=FINAL,AT&Z2=19492600154

[Modem]
PortNum=1
RevId=V2.100G_1MSVD-K56_DLS
Maker=(unknown)
Model=(unknown)
IsUpdatable=0
IsK56flex=0
IsITU=0
IsTransitional=0
ItuStatus=0