Fast Ethernet PCCard NDIS2 Drivers
Installation for Microsoft LAN Manager 2.x for DOS
====================================================
The PCMCIA Ethernet Card driver files for MS LAN Manager contained in
this directory are as follows:
DRIVER LOCATION : DRIVERS\ETHERNET\PCMFAST\PCMFAST.DOS
DRIVERS\ETHERNET\PCMFAST\PROTOCOL.INI
DRIVERS\NIF\PCMFAST.NIF
For more information about setting up the networking system and the
driver, please see you MS LAN Manager Installation and Configuration
Guide.
Please also refer to the \NDIS.DOS\README.TXT file for the optional keywords
defined for PCMFAST.DOS and to be specified in PROTOCOL.INI.
Installation procedure:
-------------------------
1. MS LAN Manager provides a SETUP.EXE program on the Setup disk.
Execute this SETUP program to specify the proper driver.
- If you are installing LAN Manager for the first time, run the
SETUP program to install LAN Manager. Near the end of the
installation, you will be asked select available network adapter
drivers. Please select "Other Driver" button.
- If you have already installed LAN Manager, run the SETUP program,
and go to "Configuration => Network Drivers => Add New Config =>
Other Drivers" button.
2. Insert this diskette into drive A and set the new path as A:\, The
SETUP program will copy the necessary NDIS driver programs to your
\MSLANMAN.DOS directory.
3. After completion of the SETUP, it will modify your CONFIG.SYS,
AUTOEXEC.BAT and PROTOCOL.INI files.
4. After completion of the SETUP, you should modify the PROTOCOL.INI
file to specify the Interrupt and IOBase parameters which must
not be conflict with other devices.
5. Reboot your computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.