1. MF5770_MFDrivers_W32_uk_EN.exe Driver
2. NetDrv.ini File Contents

NetDrv.ini Driver File Contents (MF5770_MFDrivers_W32_uk_EN.exe)

; MF Network Driver Setup
; Definition file
; 2006-Dec-14

[Setup]
; Title, BgTitle, FontName, License can be specified in following format.
;  Title.<LangID>
; In this format, you can specify language dependent strings.
; If the .<LangID> entry not found, installer uses no extension entry.
;
Version=3.00
Title=MF Drivers - Setup Wizard

; OS Filter by Hex
; ??? | 2KXP   NT   98Me  95
; 000 |  000  0|00  00|0  001 ---  0x0001(Win95)
; 000 |  000  0|00  00|0  010 ---  0x0002(Win95 OSR2)
; 000 |  000  0|00  00|1  000 ---  0x0008(Win98)
; 000 |  000  0|00  01|0  000 ---  0x0010(Win98 SE)
; 000 |  000  0|00  10|0  000 ---  0x0020(WinMe)
; 000 |  000  0|01  00|0  000 ---  0x0040(WinNT 3.5)
; 000 |  000  0|10  00|0  000 ---  0x0080(WinNT 4)
; 000 |  001  0|00  00|0  000 ---  0x0200(Win2000)
; 000 |  010  0|00  00|0  000 ---  0x0400(WinXP/.NET Server)
; If you will mask installation on only Win2000(and NT3.5),
; you should set 4BF(1+2+8+16+32+64+128+1024)
OSFilter=0x638

; devconfig_config_device timeout(IP address setting timeout)
DevconfigConfigTimeout=60

[Functions]
; Default function flags
; 0x1 Printer
; 0x2 Fax
; 0x4 Scanner
DefaultTarget=0x1
DefaultTestPrint=0x1

[Printers]
; PrinterNames=0x1,0x2,0x4...  with ACC. Key
PrinterNames=&CARPS Printer Driver
DefaultTestPrint=0x1

[Supported Devices]
; canPdInfoProductName = <Section Name>
MF5770=MF5770

[MF5770]
; Implemented function flags
; 0x1 Printer
; 0x2 Fax
; 0x4 Scanner
Functions=0x3
InfRoot=..\..\
DiskSpace=10
; Implemented Support Printer flags
; Refer to [Printers] Section
Printers=0x1
DefaultPrinters=0x1

[MF5770.PRINT.1.98]
Hwid=
InfName=
InfGUID=
DiskSpace=

[MF5770.PRINT.1.NT5]
Hwid=USBPRINT\CanonMF5770060b
InfName=win2k_vista\MF5700AK.INF
InfGUID={131BC695-268B-4f2a-8E17-59B604D6BDF7}
DiskSpace=50

[MF5770.FAX.98]
Hwid=
InfName=
InfGUID=
DiskSpace=

[MF5770.FAX.NT5]
Hwid=USBPRINT\CanonMF5770_(FAX)5F51
InfName=win2k_vista\CNXRPKW2.inf
InfGUID={BA69E813-CCD4-4e83-8B91-1A0E3ABBBDE2}
DiskSpace=50

[ExtractShareNameEditStr]
0=MF5700
1=CARPS
2=FAX

[LANGUAGES]
; 0000 ---- Neutral(Default)
0000=,NiHRes.dll

[RegistrationAPI]
PrintUI=1
SilentOption=0


[9XOsVersionString]
US=Windows 95 or 98
JP=Windows 95 ‚Ü‚½‚Í 98

; When
;    HIWORD | LOWORD
; 0x 0001     XXXX     Before
; 0x 0002     XXXX     After
; 0x XXXX     0001     Dlg_Start
; 0x XXXX     0002     Dlg_SdWelcome
; 0x XXXX     0003     Dlg_SdLicense
; 0x XXXX     0004     INIT
; 0x XXXX     0005     Dlg_DiscoveryDevice
; 0x XXXX     0006     Dlg_SelectTarget
; 0x XXXX     0007     Dlg_PortSettings
; 0x XXXX     0008     Dlg_ConfirmSettings
; 0x XXXX     0009     Dlg_InstallProgress
; 0x XXXX     000A     Dlg_Complete
; 0x XXXX     000B     Dlg_SetDefault
; 0x XXXX     000C     Dlg_PrintTestpage
; 0x XXXX     000D     Dlg_ObjDialogs
; 0x XXXX     000E     UNINIT
; 0x XXXX     000F     Dlg_SdFinish
; 
; Action
;  DoInstall --- DoInstall .inx file
;  LaunchApp --- Launch Application
;
; Name --- Display Name 
;	(can be specified language id same as Title, BgTitle, and FontName in [Setup] section.)
; Cmd --- Target file
; CmdLine --- Command line options
; ErrMsgOnLang --- ErrorMessages when the target installer's lang is different from this.
; ErrMsgOnBegin --- ErrorMessages when the file is not found.
; ErrMsgOnLaunch ---- ErrorMessages when the file is not found.
;            You can specify message on begin, and on launch.
;            0xXXXXXXXX
;            HIWORD ---- Abort or Not
;            LOWORD ---- Message id.
;            If you don't want to display the message, write 0 or don't write the entries.
;            You can specify message id up to 10.
;            These id is used MSG_ADDITIONAL_XX(00-10) on value.shl.

;            
;