Installing The NDIS 3.0 Driver
------------------------------
Installation of PCMCIA 10/100 Ethernet Card's driver for specific environment
is described as below.
Microsoft Windows NT
--------------------
Location of driver:
\WINNT\NT40\PC400F.SYS
NOTE:
-----
1)Boot up WindowsNT system, goto "Control Panel" and make sure the PC Card
(PCMCIA)program is working properly. If you can not see this icon, install
the device driver what you want, as the "CardWizard for Windows NT 4.0" or
"Socket Service and Card Service" programs, from provided firms
2)The directory structure provided on the PCMCIA 10/100 Ethernet Card's driver
diskette has been setup for automatic OEM installation. Hence, more
information could be verified in the Microsoft Windows NT User's Guide.
3)The driver support on x86-based Windows NT platforms only.
Installion Procedures:
---------------------
1. For CardBus TI-PCI1131
From Wizard Information, choose "Correct" icon to recognize this PCMCIA.
Then, click "ok" to start the network installation procedure.
2 From the "Control Panel" screen, choose "Add" on the "Adapters" page to
install the card.
3. Clicking "Have Disk" icon, insert the PCMCIA Ethernet Card's driver diskette
into the floppy drive and type the correct path as A:\WINNT\NT40.
4. Select the OEM option will apper: PCMCIA 10/100 PC Card Fast Ethernet
Adapter.
5. Accept the IRQ Level, I/O Base that windows has detect from "PCMCIA 10/100
PC Card Fast Ethernet Adapter Setup" dialog box.
6. Reboot your system after complete the driver installation process.
7. For additional information, please refer to your Microsoft Windows NT OS
documentation.
-------------------------------------[END]--------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.